Publications The following list includes all documents referred to in the text above (other than Clearinghouse publications, for which see footnote 11 to the Introduction). Documents are listed below in the approximate sequence of their mention in the text. An order blank for all NBS publications is given on the last page. RP1419, Testing and performance of volt boxes. Reprinted in Handbook 77, Vol. I, p. 211. New calibration service for peak ac-dc voltage comparators. NBS Tech. News Bull. 49, No. 3, 50 (1965). NBS Mono. 47, Basic magnetic quantities and measurement of the magnetic properties of materials. Available from the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C., 20402, 30 cents. ASTM Specifications A-34, American Society for Testing and Materials (ASTM), 1916 Race Street, Philadelphia, Pa., 19103. ASA Standard for Instrument Transformers (C57.13), American Standards Association, 10 East 49th Street, New York, 10016. Armed Services Electro-Standard Agency (ASESA), Procurement Specification MIL-C-71. ASESA: MIL-C-71. Obtainable from Commanding Officer, Naval Supply Depot, 5801 Tabor Ave., Philadelphia, Pa., 19120. Bolometric microwave power calibration techniques at NBS, IEEE, Trans. Instr. Meas. IM-12, No. 1, 29 (June 1963). RP1345. A multipurpose photoelectric reflectometer, J. Res. NBS 25, 581-618 (December 1940). NBS Circ. 429. Photoelectric tristimulus colormetry with three filters, Reprinted in Handbook 77, Vol. III, p. 529. TAPPI test method T425m-60, Technical Association of the Pulp and Paper Industry (TAPPI), 380 Lexington Ave., New York, N.Y., 10017. Federal Specification GGG-G-501b, Federal Specification GGG-G-501b obtainable from Specifications Activity, Printed Materials Supply Division, Building 197, Naval Weapons Plant, Washington, D.C., 20407. American Standard Printing Transmission Density, Type P2-b, American Standards Association, 10 East 49th Street, New York, N.Y., 10016. American Standard Diffuse Visual Transmission Density, Type VI-b, American Standards Association, 10 East 49th Street, New York, N.Y., 10016. American Standard Method PH4.8-1958, American Standards Association, 10 East 49th Street, New York, N.Y., 10016. American Standard Method PH4.30-1962, American Standards Association, 10 East 49th Street, New York, N.Y., 10016. API cable and rotary gages, API Standards are published as separate numbered documents and may be obtained from the American Petroleum Institute, 300 Corrigan Tower Building, Dallas, Tex. API Standard 7, API Standards are published as separate numbered documents and may be obtained from the American Petroleum Institute, 300 Corrigan Tower Building, Dallas, Tex. API Standard 11B, API Standards are published as separate numbered documents and may be obtained from the American Petroleum Institute, 300 Corrigan Tower Building, Dallas, Tex. API Standard 5B, API Standards are published as separate numbered documents and may be obtained from the American Petroleum Institute, 300 Corrigan Tower Building, Dallas, Tex. NBS Handbook 28. Screw Thread Standards for Federal Services. 1957 (Part I) $1.25; (Part II) $0.60; 1963 Supplement $0.70. ASTM Specification D1321-61T, American Society for Testing and Materials (ASTM), 1916 Race Street, Philadelphia, Pa., 19103. NBS Circ. 3. Design and test of standards of mass. Reprinted in NBS Handbook 77, Vol. III, p. 615. NBS Circ. 547. Precision laboratory standards of mass and laboratory weights, 35 cents. Reprinted in Handbook 77, Vol. III, p. 588. NBS Circ. 602. Testing of glass volumetric apparatus, 20 cents. Reprinted in NBS Handbook 77, Vol. III, p. 723. |