TABLE 1. Copper-base Alloys: Finishing and Coating Issues

Strip anneal gas heater 15.100 ft/min.

Temperature/temperature distribution
Properties* (texture, grain size, strength/Ys, hardness
as determined by recrystallization, stabilization and aging).

H

Cleaning
Acid cleaning,
20-60 ft/min.

Surface quality (inorganic tarnish).
Solderability/tool wear are important properties.

Not Applicab

н

cold rolling
0.1" -> 0.005",
200-1500 ft/min.

Gauge and width are standard but critical issues.
Surface quality (mechanical defects/cosmetics).
Properties* (as strip anneal, plus formability/internal inclusions).

H

Coating
Pb-Sn, Sn coatings
9-10 um, 100-300 ft/min.

Coating thickness (not chemistry).
Surface topography.
In process temperatures.

H (galvanizing

High (H), medium (M), Low (L)

Absolute property measurements are not seen as essential. A measure of product uniformity that is tightly correlated with a property or category of properties would permit the manufacture of product that could be certified according to customer needs off line (static).

11:15 am

12:00 pm

Long Range Research - North American Steel's Competitive

Edge - I. Hughes (Inland Steel)
Sensor, Process Models, and Control Needs in the Aluminum

Industry - R Bonewitz (Alcoa)
Introduction of Session Chairmen/Workshop Instructions - L. H. Schwartz (NIST)

12:45 pm

1:00 pm

LUNCH

West Square Cafeteria

3:40 pm

Sensors - A. McLean (University of Toronto), Chairman

Signals from Molten Metal
- A. McLean (University of Toronto)
Optical Diagnostics for In-Situ Measurements in

Combustion Environments - D. Hardesty (Sandia)
Electrochemical Sensors for Intelligent Processing
. C. B. Alcock (Notre Dame University)
Continuous Measurements of Molten Metal Composition
· Y. Kim (Lehigh University)