NBS Voluntary Product StandardU.S. Department of Commerce, National Bureau of Standards, 1972 |
From inside the book
Results 1-5 of 7
Page
Inspection and Test Procedures 4.1 . General 4.2 . Test conditions 4.3 . Dimensions and tolerances 4.3.1 . Inside diameter 4.3.2 . Wall thickness 4.4 . Melting point 4.5 . Specific gravity 4.6 . Tensile strength and elongation 4.6.1 .
Inspection and Test Procedures 4.1 . General 4.2 . Test conditions 4.3 . Dimensions and tolerances 4.3.1 . Inside diameter 4.3.2 . Wall thickness 4.4 . Melting point 4.5 . Specific gravity 4.6 . Tensile strength and elongation 4.6.1 .
Page
VOLUNTARY PRODUCT STANDARDS Voluntary Product Standards are standards developed under procedures estab- lished by the Department of Commerce ( 15 CFR Part 10 , as amended , May 28 , 1970 ) . The standards may include ( 1 ) dimensional ...
VOLUNTARY PRODUCT STANDARDS Voluntary Product Standards are standards developed under procedures estab- lished by the Department of Commerce ( 15 CFR Part 10 , as amended , May 28 , 1970 ) . The standards may include ( 1 ) dimensional ...
Page 1
( This Standard , initiated by The Society of the Plastics Industry , Inc. , has been developed under the Procedures for the Development of Voluntary Prod- uct Standards , published by the U.S. Department of Commerce .
( This Standard , initiated by The Society of the Plastics Industry , Inc. , has been developed under the Procedures for the Development of Voluntary Prod- uct Standards , published by the U.S. Department of Commerce .
Page 4
General - The inspection and test procedures contained in this section are to be used to determine the conformance of prod- ucts to the requirements of this Voluntary Product Standard . Each producer or distributor who represents his ...
General - The inspection and test procedures contained in this section are to be used to determine the conformance of prod- ucts to the requirements of this Voluntary Product Standard . Each producer or distributor who represents his ...
Page 5
Wall thickness - The wall thickness shall be determined in accordance with the procedures described in ASTM D 1675-65 , except that no individual measurement shall exceed the tolerances specified in tables 1 and 2 . 4.4 .
Wall thickness - The wall thickness shall be determined in accordance with the procedures described in ASTM D 1675-65 , except that no individual measurement shall exceed the tolerances specified in tables 1 and 2 . 4.4 .
What people are saying - Write a review
We haven't found any reviews in the usual places.
Common terms and phrases
acceptance ACCEPTORS accordance with ASTM American applicable Association ASTM D basis Bureau of Standards Calif Center Chemical Chicago Class committee Company complete compliance conditioned conforming consists Corporation Department of Commerce determined determined in accordance Development distributors divisions document electrical Engineering Standards Services established Fluorocarbon Government Grade Inch Inch Inch inclusive indicated individually industry inside diameter Institute intended interested less listed longitudinal mandrel Mass Materials maximum measurement Melting methods of test MICHIGAN Minimum proof pressure minus National Bureau Office of Engineering Ohio percent Philadelphia physical Pittsburgh plastic tubing points Polytetrafluoroethylene PTFE Procedures Processing Prod Programs promotes proposed provides PTFE tubing published purchaser Reference Representing requirements Research Road Rubber specified in table Stand statement strength and elongation technical Technology temperature tensile strength tested in accordance Type UNITED users Voluntary Product Standard wall thicknesses Washington weight
Bibliographic information
| Title | NBS Voluntary Product Standard |
| Author | United States. National Bureau of Standards |
| Contributor | United States. Dept. of Commerce |
| Publisher | U.S. Department of Commerce, National Bureau of Standards, 1972 |
| Original from | the University of Michigan |
| Digitized | 18 Apr 2006 |
| Export Citation | BiBTeX EndNote RefMan |