Natural Weathering of Mineral Stabilized Asphalt Coatings on Organic FeltU.S. National Bureau of Standards, 1969 - 15 pages Sixteen years of outdoor weathering of laboratory-prepared smooth-surface and mineral-surfaced, felt-base roofing specimens has provided information on the effects of mineral additives on the durability of coating-grade roofing asphalts. Six finely divided mineral additives (blue black slate, clay, dolomite, fly ash, mica, and silica) were evaluated at concentrations up to 60 percent in California, Mid Continent and Venezuela asphalts. The mineral-surfaced specimens are all performing satisfactorily, and show only minor degrees of degradation. Of the smooth-surfaced specimens, the Mid-Continent asphalt performed the best and the California asphalt the poorest. The mica and blue black slate increased the durabilities of all three asphalts at all concentrations and two coating thicknesses. Fly ash, clay, dolomite, and silica were beneficial in some combinations, but had little effect in others. In general, these early results from outdoor exposure tend to corroborate the results obtained on these coatings exposed in weatherometers. (Author). |
From inside the book
Results 1-2 of 2
Page 5
... ARIB No. 2.125 , April 1954 . 21 lb = 0.45 kg ( approx ) . d . Aluminum Panels 177 183 183 187 Percent of kerosene capacity 93 96 98 The panels , made from S - 2 aluminum alloy , were 6 in long , 234 in wide , and 0.065 in thick . e ...
... ARIB No. 2.125 , April 1954 . 21 lb = 0.45 kg ( approx ) . d . Aluminum Panels 177 183 183 187 Percent of kerosene capacity 93 96 98 The panels , made from S - 2 aluminum alloy , were 6 in long , 234 in wide , and 0.065 in thick . e ...
Page 10
... ARIB Index No. 1.119 [ 10 ] , using the electrically operated equip- ment . As recommended in the procedure , the average weight loss for 10 2 × 10 - in specimens when abraded dry must be in the range of 0.2 to 0.7 g . The only ...
... ARIB Index No. 1.119 [ 10 ] , using the electrically operated equip- ment . As recommended in the procedure , the average weight loss for 10 2 × 10 - in specimens when abraded dry must be in the range of 0.2 to 0.7 g . The only ...
Common terms and phrases
15 cents aluminum-base specimens ARIB ASTM method automatic data processing back-coated BBS_ Black Slate 25 blistering Blue Black Slate Building Science Series Bureau of Standards California asphalt Cement and Concrete Coating composition Thickness Coating thickness Composition Coatings on Organic Column 1 Column Composition Coating thickness Concrete Properties cracking and spalling doctor bar Dolomite 25 35 Felt Sidney H felt-base specimens Fly Ash 25 granule-surfaced specimens Greenfeld increased the durability Institute for Applied Interrelations Between Cement Isopropyl alcohol Kraft paper Loss on ignition losses of granules Mica Mid-Continent asphalt mineral additives Mineral Stabilized Asphalt months of exposure Months Ratio Months National Bureau Organic Felt outdoor exposures performances Portland Cement Ratio Months Ratio saturated felt shingle smooth-surface specimens Spalled Coating specimens exposed outdoors Stabilized Asphalt Coatings straight asphalt surface specimens tabs thickness Composition Coating thickness mils mils three asphalts type of specimen U.S. DEPARTMENT Venezuela asphalt Viscosity weatherometer tests