Kc, for bolometer-coupler units is defined as the ratio of the substituted dc power in the bolometer unit on the side arm of the directional coupler to the microwave power incident upon a non-reflecting load connected to the output port of the main arm. Special Publication - Page 5-71968Full view - About this book
| 1964 - 806 pages
...incident upon the bolometer unit. (f) Calibration factor, K c , for bolometer-coupler units is denned as the ratio of the substituted dc power in the bolometer...microwave power incident upon a non-reflecting load connected to the output port of the main arm. Item 201.910al 201.910a-2 201.910bl 201.910b-2 201.910C-1... | |
| 1960 - 474 pages
...mount-directional coupler combinations is defined as the ratio of the substituted dc power in the bolometer element on the side arm of the directional coupler to the...incident upon a nonreflecting load attached to the mainline port. § 201.902 Reflection coefficient magnitude measurement on waveguide reflectors (mismatches).... | |
| 1966 - 522 pages
...the substituted dc power in the bolometer unit on the side arm of the directional coupler to the rf power incident upon a nonreflecting load attached to the output port of the main arm.8 (h) For temperature-compensated bolometer units, the dc cable may be *See{201.800(b). Fees. 1... | |
| 1965 - 526 pages
...bolometer unit to the microwave power incident upon the bolometer unit. (f ) Calibration factor, Kc, for bolometer-coupler units is defined as the ratio...microwave power incident upon a non-reflecting load connected to the output port of the main arm. Item 201.910al 201.910a-2 201.910bl 201.910D-2 201.910C-1... | |
| 1966 - 562 pages
...the substituted dc power in the bolometer unit on the side arm of the directional coupler to the rf power incident upon a nonreflecting load attached to the output port of the main arm.8 (h) For temperature-compensated bolometer units, the dc cable may be •See § 201.800(b). Fees.... | |
| 1967 - 660 pages
...the substituted dc power in the bolometer unit on the side arm of the directional coupler to the rf power incident upon a nonreflecting load attached to the output port of the main arm." (h) For temperature-compensated bolometer units, the dc cable may be •See § 201.800(b). Fees. 1... | |
| 1967 - 516 pages
...substituted dc power in the bolometer unit to the microwave power incident upon the bolometer unit. (f) Calibration factor for bolometercoupler units is defined...load attached to the output port of the main arm. (g) Effective efficiency for bolometer units is defined as the ratio of the substituted dc power in... | |
| 1964 - 584 pages
...WR28... unit to the microwave power incident upon the bolometer unit. (f ) Calibration factor, Kc, for bolometer-coupler units is defined as the ratio...microwave power incident upon a non-reflecting load connected to the output port of the main arm. Item 201.910al 201.910a-2 201.910bl 201.910b-2 201.910C-1... | |
| 1964 - 588 pages
...incident upon the bolometer unit. (f ) Calibration factor, K.,, for bolometer-coupler units is denned as the ratio of the substituted dc power in the bolometer...microwave power incident upon a non-reflecting load connected to the output port of the main arm. Item 201.910al 201.910a-2 201.910bl 201.910b-2 201.910C-1... | |
| 1967 - 524 pages
...the substituted dc power in the bolometer unit on the side arm of the directional coupler to the rf power incident upon a nonreflecting load attached to the output port of the main arm.8 (h) For temperature-compensated bolometer units, the dc cable may be *See { 201.800(b). Fees.... | |
| |