Part V On-Water Amount Needed to be Identified, but not Contracted for in Advance (barrels/day) NOTE: To convert from barrels/day to gallons/day, multiply the quantities in Parts II through V by 42 gallons/barrel. ATTACHMENT I-1 EXAMPLE WORKSHEET TO PLAN VOLUME OF RESPONSE RESOURCES Part I Background Information Step (A) Calculate Worst Case Discharge in barrels (Appendix D) 170,000 (A) Step (B) Oil Group (Table 3 and section 1.2 of this appendix) 4 Step (G) On-Water Oil Recovery Resource Mobilization Factor (Table 4 of this appendix) 1 A facility that handles, stores, or transports multiple groups of oil must do separate calculations for each oil group on site except for those oil groups that constitute 10 percent or less by volume of the total oil storage capacity at the facility. For purposes of this calculation, the volumes of all products in an oil group must be summed to determine the percentage of the facility's total oil storage capacity. Part V On-Water Amount Needed to be Identified, but not Contracted for in NOTE: To convert from barrels/day to gallons/day, multiply the quantities in Parts II through V by 42 gallons/barrel. [59 FR 34111, July 1, 1994; 59 FR 49006, Sept. 26, 1994] 1.0 Model Facility-Specific Response Plan (A) Owners or operators of facilities regulated under this part which pose a threat of substantial harm to the environment by discharging oil into or on navigable waters or adjoining shorelines are required to prepare and submit facility-specific response plans to EPA in accordance with the provisions in this appendix. This appendix further describes the required elements in §112.20(h). (B) Response plans must be sent to the appropriate EPA Regional office. Figure F-1 of this Appendix lists each EPA Regional office and the address where owners or operators must submit their response plans. Those facilities deemed by the Regional Administrator (RA) to pose a threat of significant and substantial harm to the environment will have their plans reviewed and approved by EPA. In certain cases, information required in the model response plan is similar to information currently maintained in the facility's Spill Prevention, Control, and Countermeasures (SPCC) Plan as required by 40 CFR 112.3. In these cases, owners or operators may reproduce the information and include a photocopy in the response plan. (C) A complex may develop a single response plan with a set of core elements for all regulating agencies and separate sections for the non-transportation-related and transportation-related components, as described in §112.20(h). Owners or operators of large facilities that handle, store, or transport oil at more than one geographically distinct location (e.g., oil storage areas at opposite ends of a single, continuous parcel of property) shall, as appropriate, develop separate sections of the response plan for each storage area. |