irements) (7-75) Supersedes M3-4T, (1-74) quirements) (1/-75) Supers/ 34-1971 $1.75 09-1973 $1.75 974) ASTM B308-1973 $1.75 Exchanger Tubes, Speci/ Nickel Aluminum Nickel-Molybdenum-Chromium Nickel-Molybdenum-Chromium-iron specification for (1973) ASTM B3/ Zirconium and Zirconium specification for (1967) $1.75 Zirconium and Zirconium tant Nickel Base-19Cr-3.1 Mo-5.1 (Cb & Ta)-0.90Ti-0./ tant Nickel Base-19Cr-3.1Mo-5.1 (Cb & Ta)-0.90Ti-0./ Helical Age-Hardenable Nickel-Chromium-Iron Specification for AluminumSpecification for Hot Rolled Seamless Ferritic and Austenitic ce (ASME SA-193 with Additional Requirements) (2-75) S/ e (ASME SA-320 with Additional Requirements) (2-75) Su/ asme SA-540 with Additional Requirements) (2-75) Super/ Specification for (1970) $1.75 ation for (1975) $1.75 Quenched and Tempered longitudinal-Beam Ultrasonic Inspection of Carbon and Low Control of Stainless Steel Weld Cladding of Low on for (1973) AWS A5.5-1969 $3.50 Low on for (1974) Low Low ith Additional Requirements) (3-75) Supersedes MI-/ std. Spec. for Piping Fittings of Wrought Carbon Steel and t and Interpass Temperature Control for the Welding of Low service, Specification for (1975) $1.75 Ferritic Spec. for Quenched and Tempered Vacuum Treated Carbon and irements) (4-76) Supersedes M2-2T, (/ Stainless and Low irements) (11-74) Supersedes M2-4T, (4-72) irements) (7-75) Supersedes M2-8T, (7-71) Carbon and Additional Requirements) (4-76) Supersedes / Carbon and eci/ Seamless and Welded Carbon, Ferritic, and Austenitic Temperature Service (ASME SA-194 with Additional Requi/ ge Outside Diameter Light-Wall Austenitic Chromium Nickel ation for (1974A) $1.75 Seamless-Ferritic ati/ Electric-Fusion-Welded Austenitic Chromium-Nickel Centrifugally Cast Ferritic Carbon and Seamless Ferritic Specification for Specialized Carbon and Molybdenum, 2-1/4-Percent-Chromium, 1-Percent-Molybdenum ements) (5-75) Supersedes M5-5T, (7-71) onal Requirements) (12-74) Supersedes M5-3T, (5-7) 1 Requirements) (4-76) Supersedes M3-2T,/ Stainless and 1 Requ/ 2-1/4-Percent-Chromium, 1-Percent-Molybdenum ation for (1974) $1.75 Seamless and Welded Carbon and Specification for Seamless Ferritic-Austenitic ional / 2-1/4-Percent-Chromium, 1-Percent-Molybdenum ts for (1974A) $1./ Carbon, Ferritic Alloy and Austenitic equirements) (5-75) Supersedes M 3-11T/ Carbon and Low nal Requirements) (5-75) Supersedes M2-3T, / Carbon and Control of Preheat Temperature for Welding of Low ation for (1975) $1.75 for (1974A) $1.75 ements/ Low Low Pressure Vessel Plates, Pressure Vessel Plates, Pressure Vessel Plates, Pressure Vessel Plates, Pressure Vessel Plates, Std. Spec. for Pressure Vessel Plates, Specification for Pressure Vessel Plates, um and Mangane/ Pressure Vessel Plates, Specification for Forgings, Carbon and Low Titanium and Titanium Titanium and Titanium (1973) ASTM B393-1964 $1.75 Columbium and Columbium Descaling and Cleaning Titanium and Titanium cation for (19/ Seamless and Welded Titanium and Titanium 1-72) Supersedes M3-8T, (5-70/ Zirconium and Zirconium res, Spec/ Centrifugally Cast Iron-Chromium-Nickel High ckel Consumable Electrode or Vacuum Induction Melted 195/ umable Electrode or Vacuum Induction Melted 1750F (954.4C) Tantalum and Tantalum ments) (7-75) Supersedes M/ Nickel-Molybdenum-Chromium b366-1972) $1./ Factory-Made Wrought Nickel and NickelFactory Made Wrought Aluminum and Aluminum or (1973) AWS A5.10-1969 $2.50 Aluminum and Aluminum Aluminum and Aluminum Copper and CopperCopper and CopperNickel-Copper or (1974) 1969 $2.50 n for (1974) $1.75 Alloy Seamless Tubes (ASME SB-163 with Additional Requ Alloy Steel Covered Arc Welding Electrodes, Specificati Alloy Steel Plates for Pressure Vessels, Specification Alloy Steel, Chromium-Molybdenum, Specification for (1 Alloy Welded Pipe (ASME SA-358 with Additional Require Alloy Welding Rods and Bare Electrodes, Specification F Alloy (1974) ASTM C752-1973 $1.75 Alloy, Quenched and Tempered, for Pressure Vessel Comp Alloys for Core Components for Liquid Metal Service (5 $1.75 Sampling Wrought Nonferrous Metals and phy as Applied to Preparation of Micrographs of Metals and al Analysis of Nickel-Chromium and Nickel-Chromium-Iron Macroetching Metals and chemical Analysis of Nuclear Grade Silver-Indium-Cadmium ic Methods for Chemical Analysis of Copper and Copper Base Titanium and Titanium-Base magnetic, and Other Similar Iron, Nickel, and Cobalt-Base Zirconium and Zirconium-Base granular Attack in Wrought Nickel-Rich, Chromium-Bearing spectrochemical Analysis of Nuclear Grade Silver-Cadmium us Corrosion Testing of Samples of Zirconium and Zirconium d, Manganese-Molybdenum and Manganese-Molybdenum-Nickel ement of (1973) ASTM D1943-1966 $1.75 (R1971) $1.75 Heat Exchangers, Specification for (1974) ASTM B234 197/ (1975) $1.75 (1974) ASTM B221-73 $1.75 Specification for Specification for Specification for Fast Neutron Flux by Radioactivation of Recommended Practice for General ems for Equipment and Pipe Operating at Temperatures Above ems for Equipment and Pipe Operating at Temperatures Above e (1974) ASTM B241 1973 $1.75 4) ASTM B209-1973 $1.75 xtruded (1974) ASTM B308-1973 $1.75 n the Management of Patients Who Have Received Therapeutic n Detectors, Test Procedures for (1969) IEEE Std. 301-1/ 72T) $1.75 Recommended Practice for Constant 1972T)/ Recommended Practice for Presentation of Constant echanical and Electrical Equipment Qualification Tests and clides in the Environment: Strontium-89 and Strontium-90 special Nuclear Material (6/74) Radiation Safety for X-Ray Diffraction and Fluorescence Nuclear Power Reactors (3/76) Cost-Benefit on, Measuring (1973) $1.75 Fast Neutron Flux by m C560-1969 $1.75 Chemical 6-1971 $1.75 Photometric Methods for Chemical Applying Statistics to s of Terms Relating to Fatigue Testing and the Statistical for (1973) ASTM C136-1971 $1.75 Sieve or Screen Rec Practice for Sampling Atmospheres for Chemical Chemical Measurements of Radionuclides in the Environment Photometric Methods for Chemical Method of Test for Fast Neutron Flux by Fast Neutron Flux by Chemical Chemical 114-1969 $1.75 1) $1.75 75 ission (1974) As/ ission, Test for (1972) $1.75 Alloys (1973) $1.75 men Equilibration Device (Or Multipurpose Sampler) for the hods for Chemical, Mass Spectrometric, and Spectrochemical Spectrometric, Spectrochemical, Nuclear and Radiochemical s Spectrometric, Spectrochemical Nuclear and Radiochemical ods for (1974) ASTM C760-1/ Chemical and Spectrochemical s (1974) $1.75 Chemical and Spectrochemical hods for Chemical, Mass Spectrometric, and Spectrochemical hods for Chemical, Mass Spectrometric, and Spectrochemical hods for Chemical, Mass Spectrometric, and Spectrochemical Spectrometric, Spectrochemical, Nuclear and Radiochemical urements of Radionuclides in the Environment: Sampling and General Methods for Chemical 75 Alloys for Determination of Chemical Composition (1972) ASTM E55 Alloys, Chemical Analysis of (1971) $1.75 E340 C760 E62 ASTM E120 Alternating Current Power Circuits, Surge Arresters for ANSI H38.6 ASTM B210 ANSI H38.5 ANSI H38.7 /D Reflective Insulation Syst ASTM /Ulation Syst ANSI ASTM Precautions I NCRP Ambient Air Analyzer Procedures (1973T) $1.75 NRC C667 Z98.48 D1426 R37 RG 1.110 Analysis of Metals, Recommended Practice for (1974) $1. Analysis of Molybdenum-99 Activity from Uranium-238 F Analysis of Molybdenum-99 Activity from Uranium-238 F Analysis of Nickel (1975) $1.75 Analysis of Nickel-Chromium and Nickel-Chromium-Iron Analysis of Phosphorus-32, Methods for (1974) $1.75 N148 or (1973) (ASTM E195-1968) $1.75 40T, (1-73) Amendment 1 (5-76) ormed (1973) $1.75 ought Iron (1975) $1.75 c Distribution, and Impurity Det/ 75 Chemical Methods for the Chemical Spectrometric. Spectrochemical, Nuclear and Radiochemical General Methods for the Reporting Results of Radioisotopes. ide Carrier D-C Arc Technique, Method for Spectrochemical Titanium and Titanium-Base Alloys, Chemical oxide Carrier DC Arc Technique, Method for Spectrochemical hods for Chemical, Mass Spectrometric, and Spectrochemical Phosphorus-32, Methods for er Similar Iron, Nickel, and Cobalt-Base Alloys, Chemical Spectrometric, Spectrochemical, Nuclear and Radiochemical Zirconium and Zirconium-Base Alloys, Chemical u)o(2)), Chemical, Mass Spectrometric, and Spectrochemical pellets, Chemical, Mass Spectrometric, and Spectrochemical pellets, Chemical, Mass Spectrometric, and Spectrochemical Grade Uranyl Nitrate Solutions, Nuclear and Radiochemical carbide, Chemical, Mass Spectrometric, and Spectrochemical spectrometric, Spectrochemical, Nuclear and Radiochemical, powders, Chemical, Mass Spectrometric, and Spectrochemical powders, Chemical, Mass Spectrometric, and Spectrochemical Standard Format and Content of Safety Standard mat and Content of Safety Standard mat and Content of Safety ant Pressure Boundary Components Information for Safety Information for Safety Information for Safety (9/75) 74) d Electrical Equipment Qualificat/ Analysis of Reactor and Commercial Columbium. Methods F ANSI 72581 ERDA RDI F3-40T ASTM D2790 ASTM E30 6/75) hase (12/74) Information for Safety Information for Safety Information for Safety Information for Safety Information for Safety Information for Safety ion and Electrical Equipment (2/7/ (4/75) analysis (7-73) Material (7-73) ts (9-75) $1.75 1.75 Information for Safety Information for Safety Information for Safety Information for Safety modal Responses and Spatial Components in Seismic Response Test for Nickel on Steel by Photometric of Analytical Chemistry Laboratories for Mixed Oxide Fuel I Chemistry Laboratories for Control Rod Absorber Material ber Material Analysis (7-7/ Qualification and Control of Qualification and Control of 3) Amendment 1 (12-74) fluoride (UF) and Uranium Hexafluoride (UF) 2/ Standard Accountability of Uranium Hexafluoride, Accountability of Uranium Tetrafluoride, Using the Mass Spectrometer Leak Detector or Residual Gas Recommended Practice for General Ambient Air Abrasion of Small Size Coarse Aggregate by Use of the Los Stainless Steel Globe and Ultrasonic Operating Performance of Guide for in Service Recommended Guide for in Service fluents for the Purpose of Evaluating Com/ Calculation of 8-73) for (1973) $1.75 ) ASTM E509-74 $1.75 ) $1.75 r Reactor Plants (Issued Fo/ Draft Standard Evaluation of Regulatory Staff Position Statement on information Needed by the NRC Staff in Connection with Its Needed by the AEC Regulatory Staff in Connection with Its 4) (R1970) IEEE 21-1964 $4.00 Outdoor Mechanical Power Transmission onents (1977) bd ($70.00) II ($90.00) ASTM Angeles Machine, Method of Test for (1970) ASTM C131– Apparent Density of Activated Carbon, Test for (1970) $ Appendices to Sec. III Div. 1, Nuclear Power Plant Comp cast Iron-Chromium-Nickel High Alloy Tubing for Pressure Application at High Temperatures, Specification for (19 Analysis Reports: Reactor Water Cleanup System (5/75) NRC RG 1.70.32 Combining NRC RG 1.92 C715 RDT F2-6T 72) Amendment 1 (11-74) power Generating Station Protection Syste/ Power Plant Protection Systems (6/73) 71 (76) ) (2-75) Super/ Preparation and Draft Standard Calculation of Neutron Dose to Polymeric Materials and d Accounting Section of a Special Nuclear Material License Pipe Hangers and Supports-Selection and rconium and Zirconium Alloy Bars, Rod and Wire for Nuclear rements for Bolting Material for Nuclear and Other Special Guide for the Preparation of onnection with Its Antitrust Review of Construction Permit Connection with Its Antitrust Review of Operating License ion Plants (1/76) Standard Format and Content of License ess Than Critical Mass Quan/ Guide for the Preparation of uel and Associate/ Standard Format and Content of License Guide to the Contents of Alloy Steel Bolting Material for Special irements for Materials Used in Reactor Coolant System Wear nt of Neutron Flux and Spectra for Physical and Biological joactivity Procedures (A) Stds. (B) Medical and Biological ication for Alumina Ceramics for Electrical and Electronic irements for Pipe and Tubing for Nuclear and Other Special uirements for Steel Castings for Nuclear and Other Special ec. for Homogeneous Tool Resisting Steel Bars for Security spec. for Tool Resisting Composite Steel Bars for Security for Tool Resisting Steel Flat Bars and Shapes for Security equirements for Steel Plates for Nuclear and Other Special ought Steel Welding Fittings for Nuclear and Other Special ements for Forgings and Bars for Nuclear and Other Special Spec. for Copper Alloy Sand Castings for General ifications for Thermoluminescence Dosimetry-Environmental of Radioisotopic Power Generators for Certain Land and Sea Elastomeric Materials for Automotive Steel Castings for the Nuclear and Other Special Bolting Material for Nuclear and Other Special Steel Plates for Nuclear and Other Special ought Steel Welding Fittings for Nuclear and Other Special r (1973)/ Forgings and Bars for Nuclear and Other Special sheathed, Type K for Nuclear or for Other High Reliability Alloy Steel Bolting Materials for Special plementary Requirements for Nickel Alloy Plate for Nuclear ements for Nickel Alloy Seamless Pipe and Tube for Nuclear nic Examination of Plain and Clad Steel Plates for Special heathed, Type K, for Nuclear or for Other High Reliability Zirconium and Zirconium-Alloy Ingots for Nuclear irements for Pipe and Tubing for Nuclear and Other Special (1970) $1.75 Nickel Alloy Plate for Nuclear (1970) $1.75 Nickel Alloy Rod and Bar for Nuclear (1970) S/ Nickel Alloy Seamless Pipe and Tube for Nuclear nts) for Fuel Reprocessing Plants (6/75) Selection, n Independent Spent Fuel Storage/ Guidance on the License um and Zirconium Alloy Sheet, Strip, and Plate for Nuclear rconium and Zirconium Alloy Bars, Rod and Wire for Nuclear um and Zirconium Alloy Sheet, Strip, and Plate for Nuclear rconium Sponge and Other Forms of Virgin Metal for Nuclear Zirconium and Zirconium Alloy Ingots for Nuclear rconium Sponge and Other Forms of Virgin Metal for Nuclear Guidance to Academic Institutions r (1973/ r (1973) / r (1973) $1.7/ 1.75 ) tice for (1973) ASTM G16-1971 $1.75 tine Reactor Releases for the Purpose of Impl/ irconium Alloys, Practice for (1974) $1.75 .1-1969 $3.50 .5-1969 $3.50 .6-1969 $2.50 Estimating Colorimetric Determination of Uranium in Method for Colorimetric Determination of Uranium in ommended Practices for Volatile Organic Matter in Water by 1972) ASTM E40/ Uranium Oxide by Gallium Oxide Carrier DC 1970) $1.75 Uranium Oxide by Gallium Oxide Carrier D-C Tungsten Mild Steel Covered Low Alloy Steel Covered Copper and Copper-Alloy Mild Steel Covered Low Alloy Steel Covered Copper and Copper-Alloy ts) (7-75) Supers/ Mild Steel Electrodes for Flux-Cored s) (3-75/ Mild Steel Electrodes and Fluxes for Submerged s) (4-75) Supersede/ Mild Steel Electrodes for Gas Metal cent-Molybdenum Alloy Electrodes and Fluxes for Submerged Bare Mild Steel Electrodes and Fluxes for Submerged Mild Steel Electrodes for Gas Metal Mild Steel Electrodes for Flux-Cored Mild Steel Electrodes and Fluxes for Submerged Mild Steel Electrodes for Gas Metal Mild Steel Electrodes for Flux-Cored specification for (1974) $1.75 Electric-Fusion Instrument Purging for Reduction of Hazardous Selection of Material Balance 2.50 2.50 2.50 /Cification ERDA RDT F1-1 ANSI N41.2 Application of RDT Stds. (12-73) Supersedes F1-1, (7- /Esting, and Procedural Spec ANSI Design, Construction, and Use NRC Arc Welding Electrodes, Specification for (1973) AWS A5 2-1/4-Percent-Chromium, 1-Per ERDA Areas and Item Control Areas (Revision 1, 4/75) Areas (6/73) Areas, and Material Access Areas (6/73) Assay of Plutonium-Bearing Solids Applied to Nuclear M Control of Personnel a NRC RG 5.7 NRC RG 5.7 NRC RG 5.7 NRC RG 5.31 ASTM D2441 Special Construction, Special Construction, Special Consideration, USCG 46CFR99 (Askarels) by Refluxing (1972) $1.75 ainless Steel Hexagonal Duct Tubes for Core Components and Welding of Reactor Core Components and Test dated Edition (Includes ANSI C37.20A-1970, C/ Switchgear Sheathed (1-72) Thermocouple dment 2 (1-74) Surveillance Program for New Fuel Open Test FFTF Closed Loop in Reactor 1 (12-73), / Control Rod Electric Heater and Connector Forced Circulation Cold Trap Plugging Temperature Indicator Fuel Fuel and Control ent 1 (8-73, Amend/ Gamma Compensated lonization Chamber Fission Type Neutron Detector Driver Fuel response Test for Sheathed, Mineral Insulated Thermocouple athed, Magnesium / Thermocouple Material and Thermocouple mentation for Light-Water-Cooled Nuclear Power Plants to dividual Observed Values) (1974) $4.00 dividual Observed Values) (4/74) nuclear Power Plants (1973/ Cleaning of Fluid Systems and lity Assurance Requirements for Cleaning Fluid Systems and 7-73) Visual in Service Inspection System and ications for Storage Only of Unirradiated Reactor Fuel and values) (1974) $4.00 Assessment of the values) (4/74) Assessment of the des E6-33T, (11-71) Amendment Acceptable Concepts, Models, Equations, and power Plant Control Room During a Postulated Hazardous C/ accident for Pressurized Water Reactors (5/74) cal Consequences of a Pressurized Water Reactor Radioact/ cal Consequences of a Fuel Handling Accident in the Fuel/ cal Consequences of a Loss of Coolant Accident for Boili/ cal Consequences of a Loss of Coolant Accident for Press/ cal Consequences of a Steam Line Break Accident for Boil/ cal Consequences of a Radioactive Offgas System Failure / Additional Information: Quality Information for Safety Analysis Reports: Quality Quality Quality cilities (1972) $3.00 Assemblies for Pressurized Water Reactors (7-71) Amend Assembly, Chromel-P Versus Alumel, Stainless Steel She |