Specification for Seamless Specification for Simulated Fabrication of Austenitic Stainless Steel Hexagonal Duct Tubes for Welding of Reactor Piston Rings of High Strength Alloys for Austenitic Stainless Steel Plate, Sheet, and Strip for Austenitic Stainless Steel Wire for Austenitic Stainless Steel Bar for Austenitic Stainless Steel Tubing for LMFBR Low Friction Hard Surface for Analytical Chemistry Methods for Metallic Net Positive Suction Head for Emergency Sumps for Emergency Preoperational Testing of Emergency Flux
Recommended Practice for Test for Elastic Moduli of Rock Test for Triaxial Compressive Strength of Undrained Rock Method of Test for Direct Tensile Strength of Rock method of Test for Unconfined Compressive Strength of Rock ication Only) (1-72) Amendment 1 (12-72), Amendment 2/
irements) (7-75) Supers/ 1969 $2.50
Copper Alloy (UNS N04400) Seamless Pipe and Tube (197.) Copper and Constantan. Solid Corductor (Bare, Fiberglas Copper and Copper Alloy Die Forgings (Hot Pressed) (197 Copper and Copper Alloy Forging Rod, Bar, and Shapes (1 Copper and Copper Base Alloys (975) $1.75 Copper and Copper Alloy Arc Welding Electrodes, Specif Copper and Copper Alloy Arc Welding Flectrodes. Specif Copper and Copper Alloy Seamless Condenser Tubes and F Copper and Copper Alloy Welding Rods, Specification Fo Copper and Copper Alloy Welding Rods, Specification Fo Copper and Iron Powders, Test for (1974) $1.75 Copper Base Alloys (1975) $1.75 Copper Pipe (1975) $1.75
Copper-Alloy Arc Welding Electrodes, Specification for Copper-Alloy Arc Welding Electrodes, Specification for Copper-Alloy Seamless Condenser Tubes and Ferrule Stoc Copper-Alloy Welding Rods, Specification for (1973) Aw Copper-Alloy Welding Rods, Specification for (1974) Copper-Constantan, Mineral-Oxide Insulated, Sheathed Copper-Nickel Alloy Plate and Sheet for Pressure Vesse Copper-Nickel Pipe and Tube (1975) $1.75 Copper-Silicon Alloy Rod, Bar, and Shapes (1974A) $1.7 Copper, Sheet, Strip. Plate, and Rolled Bar, Specificat Core Assemblies for Nuclear Reactors (3-73) Amendment Core Component Pot for Liquid Metal Service (3-72) Ame Core Components and Assemblies (5-76) Supersedes E6-2 Core Components and Test Assemblies (7-73) Core Components for Liquid Metal Service (5-74) Core Components (3-73)` Core Components (3-73)
Core Components (3-73) Amendment 1 (4-74) Core Components (5-72)
Core Components (5-73) Amendment 1 (9-73) Core Components (9-75)
Core Cooling and Containment Heat Removal System Pumps Core Cooling and Containment Spray Systems (6/74) Core Cooling Systems for Pressurized Water Reactors (Re Steel Electrodes (1974) $3.50 Core Corrosion-Resisting Chromium and Chromium-Nickel iquid Metal Service (4-73) Core Permanent Magnet Flow Through Type Flowmeter for L cation Only) (8-72) Amendment 1 (4-73) Core Radial Reflector for Sodium Cooled Reactors (Fabri amendment 1 (4-72), Amendment 2 (7-73), Amendment 3 (3/ Core Radial Shield for Sodium Cooled Reactors (12-71) brication Only) (10-72) Amendment 1 (3-74) Core Restraint Mechanism for Sodium Cooled Reactors (Fa Core Sampling of Graphite Electrodes, (1974) $1.75 Core Specimens in Uniaxial Compression (1972) $1.75 Core Specimens Without Pore Pressure Measurements (1974 Core Specimens (1972) (ASTM D2936-1971) $1.75 Core Specimens (1972) (ASTM D2938-1971A) $1.75 Core Support Structure for Sodium Cooled Reactors (Fabr Core Support Structures (1977) bd ($40.00), II ($70.00) Mild Steel Electrodes for Flux-Cored Arc Welding (ASME SFA -5.20 with Additional Requ Mild Steel Electrodes for Flux- Mild Steel Electrodes for Flux- Obtaining and Testing Drilled Spec for Alloy Bars, Forgings, and Rings. um Induction Melted 1750F (954.4C) Alloy Tubing, Seamless, Alloy Sheet, Strip, and Plate, Alloy Sheet, Strip, and Plate, Alloy Tubing (Seamless, Guidance for Avoiding Intergranular Applying Statistics to Analysis of n Stainless Steel (1971) $1.75 Evaluating Stress Guidance for Avoiding Intergranular Corrosion and Stress 150 lb. 150 lb. Steel Sheet, Total Immersion Aqueous
tm C42-1968 $1.75
5.1 (Cb+Ta)-/
5.1 (Cb & Ta)-0.90Ti-0 /
5.1 (Cb & Ta)-0.90Ti-0./
e or Vacuum Induction Melted 195/ steel Components of /
Alloys, Practice for (1974) $1.75
Cored Arc Welding, Specification for (1973) AWS A5.20- Cored Arc Welding, Specification for (1974)
Cores and Sawed Beams of Concrete, Method of (1969) as Corrosion and Heat Resistant Nickel Base-19Cr-3.1 Mo- Corrosion and Heat Resistant Nickel Base-19Cr-3.1 Mo- Corrosion and Heat Resistant Nickel Base-19Cr-3.1 Mo- Corrosion and Heat Resistant Nickel Base-19Cr-3.1 Mo- Corrosion and Heat Resistant Nickel Consumable Electrod Corrosion and Stress Corrosion in Austenitic Stainless Corrosion Data, Practice for (1973) ASTM G16-1971 $1.7 Corrosion Effect of Wicking-Type Thermal Insulations O Corrosion in Austenitic Stainless Steel Components of F. Corrosion Resistant Cast Flanged Valves (1959) $3.00 Corrosion Resistant Cast Flanges and Flanged Fittings ( Corrosion Resistant, Laminated Surface Bonded (1973) SA Corrosion Test for Soak Tank Metal Cleaners (1972) $1.7 Corrosion Testing of Samples of Zirconium and Zirconium Corrosion-Resisting Chromium and Chromium-Nickel Stee Corrosion-Resisting Chromium and Chromium-Nickel Stee Corrosion-Resisting Chromium and Chromium-Nickel Stee Corrosion-Resisting Chromium and Chromium-Nickel Stee Corrosion-Resisting Chromium and Chromium-Nickel Stee Corrosion-Resisting Chromium Steel Clad Plate, Sheet a Corrosive or High Temperature Service, Specification Fo Corrosive Service, Practice for (1971) $1.75 Corrosivity of Adhesive Materials (1974) $1.75 Cost-Benefit Analysis for Radwaste Systems for Light- Coulometry, Method of Test for (1970) $1.75 Coulometry, Method of Test for (1973) ASTM E217-1970 $ Count Rate Source Range Neutron Flux Monitoring System Counter Tubes (1965) (R1971) $3.00 and N42.6 Are Contai Counters (12-75) Supersedes C10-3T, (3-72) Counters (5/73)
Counters (8-71) Amendment I (6-73), Amendment 2 (10- Counters, Test Procedures for (1969) (R1974) IEEE Std. Counting and Glossary for Scintillation Counting Field
cations for Special Nuclear Material Licenses of Less Than
Dosimetry for Criteria for Nuclear
) AWS A5.1-1969 $3.50 ) AWS AS 5-1969 $3.50
al Requirements) (3-75) Supersedes M1-3T. (/ nal Requirements) (3-75) Supers/
al Requirements) (3-75) Supersedes M1-/ al Requirements) (3-75) Supersedes MI-/ s A5 11-1969 $2.50
for Scintillation Counting and Glossary for Scintillation ygen Content Using a 14-MeV Neutron Activation and Direct ygen Content Using a 14-MeV Neutron Activation and Direct 1-75) Sodium Methods for the Analysis of Sodium and Mild Steel Low Alloy Steel Mild Steel Low Alloy Steel Mild Steel and Nickel Alloy Stainless Steel Low Alloy Steel Nickel and Nickel-Alloy Corrosion-Resisting Chromium and Chromium-Nickel Steel Nickel and Nickel-Alloy Corrosion-Resisting Chromium and Chromium-Nickel Steel Density of Preformed Pipe ) ASTM D1693-1970 $1.75 Environmental Stress1.75 Method of Test for Accelerated Ozone Overhead Specifications for Electric Overhead Traveling nd Under Running Single Girder Electric Overhead Traveling Large Shipping Cases and ion Systems (12-69) Supplementary nd Adsorption Units of / Design, Testing, and Maintenance rations Where Shielding Protects Personnel (1975) ANS 8./ Earthquake Instrumentation General Site Suitability
Nuclear Power Plants (Revision 1, 6/73) its, (Trial Std. Issued for Use and Comme/ Draft Standard ctor Plants: Issued Fo/ Draft Standard for Nuclear Safety Reactor Plants (1973) ANS-51.1 $30.50 Nuclear Safety Reactor Plants (1975) $5.50 Standard Nuclear Safety ng of Nuclear Power Generating Station Protection Systems, Protection Systems for Nuclear Power Generating Stations, Film Badge Performance,
ar Fuel Reprocessing Facilities, Guide to Principle Design ss 1E Power Systems for Nuclear Power Generating Stations, moderated Nuclear Power Generating Plants, Fire Protection
Supplies for Nuclear Power Generating Stations, Trial Use protective Functions in Nuclear Power Generating Stations, Basic Radiation Protection Film Badge Performance Draft Standard Application of the Single Failure Application of the Single-Failure Transportation of Hoisting and Rigging of
ment 1 (10-72), Amendment 2 (7-/ of (1975) ANS-1 $8.00
ng Protects Personnel (1975) ANS 8./ ials Outside Reactors (1975) ANS-8.1 $10.00 ials Outside Reactors (1/73) Guide for (1975) ANS-8.7 $12.00
stm C626-1971/ 3) ASTM C695-1971T $1.75
Nuclear Nuclear Nuclear Validation of Calculational Methods for Nuclear Validation of Calculational Methods for Nuclear Thermal Neutron Absorption Estimating the Thermal Neutron Absorption Compressive Compressive strength of Hydraulic Cement Mortars (Using 2-in (50-mm) amma and Electron Radiation Dose with the Ferrous Sulfateamma and Electron Radiation Dose with the Ferrous SulfateElectrical Insulation (1969) (R197/ Std. Spec. for Fully specimens in the Field, Method of (1970) ASTM/ Making and Making and Sheet Materials for Eddy Alternating Direct Eddy Review of the Eddy
d of (1973) ASTM C192-1969 $1.75
rs (8-71) Amendment 1 (6-73), Amendment 2 (10-74) $3.00
Saturation, Practice for (1973) ASTM E309-1971 $/ uid Metal Pressure Measurement System, Flush Mounted, Eddy or Measuring Coating Thickness by Magnetic-Field or EddyWelding and
Water Vapor Transmission of Shipping Containers by Method of Test for Density of Soil in Place by the Drive Compressed Gas Splitting Tensile Strength of Compressive Strength of
v-1-1965 $7.00 3) ASTM C496-1971 $1.75 4) ASTM C39-1972 $1.75
Counting Field (1972) IEEE Std. 398-1972 $5.40 Counting Technique, Method of Test for (1973) $1.75 Counting Technique, Method of Test for (1974) ASTM E385 Cover Gas Purchase Specifications (7-72) Amendment 1 ( Cover Gas (1-76) Supersedes F3-40T, (1-73) Amendment Covered Arc Welding Electrodes, Specification for (1973 Covered Arc Welding Electrodes, Specification for (1973 Covered Arc Welding Electrodes, Specification for (1974 Covered Arc Welding Electrodes, Specification for (1974 Covered Welding Electrodes (ASME SFA-5.1 with Addition Covered Welding Electrodes (ASME SFA-5.11 with Additio Covered Welding Electrodes (ASME SFA-5.4 with Addition Covered Welding Electrodes (ASME SFA-5.5 with Addition Covered Welding Electrodes, Specification for (1973) Aw Covered Welding Electrodes, Specification for (1973) Aw Covered Welding Electrodes, Specification for (1974) Covered Welding Electrodes, Specification for (1974) Covering Type Thermal Insulation, Test for (1972) $1.75 Cracking of Ethylene Plastics, Method of Test for (1971 Cracking of Vulcanized Rubber (1971) ASTM D1149-1970 $ Crane Handling Systems for Nuclear Power Plants (2/76) Crane (1971) $3.00 Cranes (1974) $3.00 Crates, Testing (1973) $1.75 Creep of Concrete in Compression, Test for (1974) $1.75 Criteria and Requirements for RDT Reactor Plant Protect Criteria for Atmosphere Cleanup System Air Filtration a Criteria for Nuclear Criticality Safety Controls in Ope Criteria for Nuclear Power Plants (1974) ANS 2.2 $10.00 Criteria for Nuclear Power Stations (Revision 1, 11/75) Criteria for Safety-Related Electric Power Systems for Criteria for Separation of Class IE Equipment and Circu Criteria for the Design of Stationary Boiling Water Rea Criteria for the Design of Stationary Pressurized Water Criteria for the Design of Stationary Pressurized Water Criteria for the (1975) $5.00
Criteria for (1972) IEEE Std. 279-1971 $4.00 Criteria for (1972) $4.25 Criteria for (1973) $5.00
Criteria for (1975) IEEE Std. 308-1974 $4.00 Criteria For, Issued for Trial Use and Comment (ANS-59 Criteria (Issued for Trial Use and Comment) IEEE 387-1 Criteria (Issued for Trial Use and Comment) (ANS 4.1) $ Criteria (1971) $4.00
Criterion to Nuclear Power Generating Station Protectio Criterion to Nuclear Power Plant Protection Systems (6/ Critical Components and Equipment (1-76) Critical Components and Related Equipment (8-72) Amend Critical Experiments, Safety Guide for the Performance Critical Mass Quantities (7/76) / Preparation of Appli Criticality Accident Alarm System (1969) ANS-8.5 $3.00 Criticality Accident Alarm Systems (12/74) Criticality Accidents (1969) $4.25
Cross Section of Nuclear Graphite, Estimating the (1971 Cross Section of Nuclear Graphite, Methods for (1973) a (Crushing) Strength of Graphite, Method of Test for (197 (Crushing) Strength of Graphite, Test for (1975) $1.75 Cube Specimens), Test for (1973) $1.75
Cupric Sulfate Dosimeter, Method of Test for (1973) (As Cupric Sulfate Dosimeter, Test for (1971) Cured Silicone Rubber Coated Glass Fabric and Tapes for Curing Concrete Compressive and Flexural Strength Test Curing Concrete Test Specimens in the Laboratory, Metho Curing Concrete, Specifications for (1970) (R1975) ASTM Current Flowmeter Power Supply and Signal Conditioning Current Power Circuits, Surge Arresters for (1975) IEEE Current Power Range Neutron Flux Monitoring System (7- Current Probe Type Flow Sensor for Liquid Metal Service Current Pulse Preamplifiers for Use with Fission Counte Current State of Radiation Protection Philosophy (1975) Current Testing of Steel Tubular Products with Magnetic Current Type, Inductive, Absolute or Gage (10-70) Amen Current (Électromagnetic) Test Methods (1974) $1.75 Cutting. Safety in (1973) $5.00 Cycle Method, of Test for (1973) $1.75 Cylinder Method (1972) (ASTM D2937-1971) $1.75 Cylinder Valve Outlet and Inlet Connections (1965) CGA Cylindrical Concrete Specimens, Method of Test for (197 Cylindrical Concrete Specimens, Method of Test for (197
Criticality Safety Controls in Operations Where Shieldi Criticality Safety in Operations with Fissionable Mater Criticality Safety in Operations with Fissionable Mater Criticality Safety in the Storage of Fissile Materials, Criticality Safety (1975) ANS-8.11 Criticality Safety (6/76)
Thermal Insulating Materials, Activated Carbon, Radioactive Waste Categories, Terms and Symbols Relating to Emission Spectroscopy, nd Graphite (1975) $1.75
975B) $1.75 ANSI C59.75 (1973)
g (1974) ASTM E268 1968 $1.75
Cylindrical Shipping Containers, Drop Test for (1973) $ Damage to Reactor Vessel Materials (7/75) Damping Values for Seismic Design of Nuclear Power Plan Dangerous Articles and Magnetized Materials (1975) $5.0 Dangerous Articles as Ships, Stores and Supplies on Boa Dangerous Articles or Substances and Combustible Liquid Dangerous Articles or Substances and Combustible Liquid Data Acquisition Systems (Revision 1, 5/74)
Data for the Protection of Special Nuclear Material (6/ Data Sets for Reactor Design Calculations (1975) ANS-1 Data (1973) (ASTM E206-1972) $1.75 /F Terms Relating ANSI Data, Practice for (1973) ASTM G16-1971 $1.75 Dealing with Outlying Observations (6/74) Decade) Neutron Flux Monitoring Channel (2-71) Decision Making in a Nuclear Attack (1974) $4.00 Defects or Failure to Comply (1975) $2.95 Definition of Terms Relating to Acoustical Tests of Bui Definition of Terms Relating to Water (1974) $1.75 Definition of Terms Relating to (1963) (R1968) $1.75 Definition of Terms Relating to (1967) $1.75 Definition of Terms Relating to (1974) $1.75 Definition of (1967) $3.00
Definition of (1975A) $1.75
Definitions and Terms Relating to Manufactured Carbon a Definitions for Mechanical Testing of Steel Products (1 Definitions of Terms Relating to Dosimetry (1973) ASTM Std. Definitions of Terms Relating to Electric Insulation (1 Definitions of Terms Relating to Electromagnetic Testin
e Statistical Analysis of Fatigue Data (1973) (ASTM E206/ Definitions of Terms Relating to Fatigue Testing and th ction (1974) $1.75
Definitions of Terms Relating to Liquid Penetrant Inspe Definitions of Terms Relating to Magnetic Particle Insp Definitions of Terms Relating to Rubber and Rubber Like Definitions of Terms Relating to Temperature Measuremen Definitions of Terms Relating to Ultrasonic Testing (19 Definitions of Terms Used in IEEE Standards on Nuclear Definitions of (1973) ASTM E425—1971 $1.75 Definitions (1973) $3.00 Definitions (2/74) (Definitions) (1975) $2.95
Terms Relating to Leak Testing, Quality Assurance Terms and Quality Assurance Terms and Food and Drugs: Subpart A, General Provisions ing to (1/ Nuclear Magnetic Resonance (NMR) Spectroscopy, forcement (1975) $1.75 Specification for actor Coolant Water During Reactor Operation, Method For/ eactor Coolant Water During Reactor Operation, Measureme/ edures for Calibrating Magnetic Instruments to Measure the od of Test for (1973) ASTM C624-1971 $1.75 for (1971) $1.75 4)
Additional Information: Geography and generators by Radioactivation Techniques, / Neutron-Flux rators by Radioactivatio/ Method of Test for Neutron Flux Measuring Neutron Flux cles by Physical Measurements, Method of Test for (1973)/ Apparent Thickness and Test for Relative
ng Materials, Test for (1970) $1.75 $1.75
Test for Particulate Matter in the Atmosphere (Optical
Sodium and Potassium in Water and Water Formed late Matter in the Atmosphere (Optical Density of Filtered il and Soil Aggregate in Place by Nuclear Methods (Shallow il and Soil Aggregate in Place by Nuclear Methods (Shallow I and Soil-Aggregate in Place by Nuclear Methods (Shallow aces, Rec. Practice for (1974) $1.75
Preparation of System Design stituents of Aggregates for Radiation-Sheilding Concrete, stituents of Aggregates for Radiation-Shielding Concrete, Draft Standard for Plant Recommended Rules for
nt ANS 58.1 $12.00 storage Tanks (1973) $4.00 osive Service, Practice for (1971) $1.75 Additional Information: Quality Assurance During Quality Assurance Program Requirements Protection for Energies Up to 10 MeV Structural Sheilding Code Case Acceptability: ASME Section lii Pipe Hangers and Supports-Material, Radiological Safety in the s for Type a Quantities of Radioactive Materials, Guide to Gamma Ray Protection for Energies Up to 10 Mev: Equipment
Definitions, Symbols, Conventions, and References Relat Deformed and Plain Billet-Steel Bars for Concrete Rein Delayed Neutron Emitting Fission Products in Nuclear Re Delayed Neutron-Emitting Fission Products in Nuclear R Delta Ferritic Content of Austenitic Stainless Steel We Delta-In-Hours (DIH) Purity of Nuclear Graphite, Meth Delta-In-Hours (DIH) Purity of Nuclear Graphite, Test Demography Considerations for Nuclear Power Plants (8/7 Density and Average Energy from 3H(d,n)'He Neutron Density and Average Energy from 3H(D, N)4He Neutron Gene Density by Radioactivation of Cobalt and Silver (1973T) Density in Air of Manufactured Carbon and Graphite Arti Density of Activated Carbon, Test for (1970) $1.75 Density of Blanket-Type or Batt-Type Thermal Insulati Density of Cohesionless Soils (1972) (ASTM D2049-1969) Density of Filtered Deposit) (1969) $1.75 Density of Preformed Block Type Thermal Insulation, Tes Density of Preformed Pipe Covering Type Thermal Insulat Density of Soil and Soil-Aggregate in Place by Nuclear Density of Soil in Place by the Drive Cylinder Method ( Density Relations of Soils Using 10 lb. (4.5 mg) Rammer Density Relations of Soils, Using 5.5-lb. (2.5-kg) Ra Dental Offices (1970) $4.00
Department of Transportation Special Permits for Radioa Depleted Uranium Castings (1975) $3.00
Deposits by Flame Photometry, Tests for (1971) $1.75 Deposit) (1969) $1.75
Depths), Test for (1972) $1.75
Test for Particu ASTM Moisture Content of So ASTM /Nt of So ANSI Density of Soi ASTM
Depth) (1972) $1.75 (ASTM D3017-1972) $1.75 Depth), Tests for (1971) $1.75 Descaling and Cleaning Titanium and Titanium Alloy Surf Descriptions (12-75) Supersedes (3-72) Descriptive Nomenclature of (1973)
Descriptive Nomenclature of (1975) ASTM C638-1973 $1.7 Design Against Missiles-Issued for Trial Use and Comme Design and Construction of Large, Welded, Low Pressure Design and Construction of Nonmetallic Gaskets for Corr Design and Construction (7/74) (Design and Construction) (Safety Guide 28, 6/7/72) Design and Evaluation (1970) $4.00
Design and Fabrication (Revision 6, 5/76) Design and Manufacture (1967) $4.00 Design and Operation of Particle Accelerators (1969) NB Design and Use of (1975) $5.00 Design and Use (1968) $3.00
Design Considerations for Minimizing Residual Holdup of Design Considerations for Minimizing Residual Holdup of Design Considerations for Minimizing Residual Holdup of Design Considerations: Systems for Measuring the Mass O Design Criteria for (1973) $5.00
Design Descriptions (12-75) Supersedes (3-72) Design for Nuclear Power Plants (5/74) Design Guide for Plutonium Processing and Fuel Fabricat Design Guide for Ventilation Systems for Fuel Reprocess Design Guide for Ventilation Systems of Plutonium Proce Design Limits and Loading Combinations for Metal Primar Design Limits and Loading Combinations for Seismic Cate Design Objectives for Highly Radioactive Solid Material Design of Main Steam Isolation Valve Leakage Control Sy Design of Mechanical and Electrical Equipment Qualifica Design of Nuclear Power Plants and Test Facilities (1- Design of Nuclear Power Plants (Revision 1, 12/73) Design of Nuclear Power Plants (Revision 2, (6/76) Design of Nuclear Power Plants (10/73) Design of Nuclear Power Plants (1974) $5.50 Design of Nuclear System Components at Elevated Tempera Design of Seismic Category 1 Structures (11/74) Design of Stationary Boiling Water Reactor Plants: Issu Design of Stationary Pressurized Water Reactor Plants ( Design of Stationary Pressurized Water Reactor Plants ( Design Procedures (12/74)
Draft Standard for Fuel Storage Facility Nuclear Data Sets for Reactor Seismic Seismic Tornado
ons in Nuclear Power G/ 1,4/76)
Draft Standard for Preparation of Design Bases for Systems That Perform Protective Functi
tance to Shock and Vibration in Truck Transport (2-75) inst Effects of Postulated Pipe Ruptu/
Design Basis Floods for Nuclear Power Plants (Revision Design Basis for Fuel and Irradiations Experiment Resis Design Basis for Protection of Nuclear Power Plants Aga Design Basis Tornado for Nuclear Power Plants (4/74) Design Basis (Revision 1, 12/75)
Design Calculations (1975) ANS-19.1 $12.50 Design Classification for Plutonium Processing and Fuel Design Classification (Revision 2, 2/76) Design Classification (6/76)
Design Response Spectra for Seismic Design of Nuclear P Design Stability of Embankment Retention Systems for Ur Design (5/75)
Designation of Z208.1-1970) $1.75 Designations for (1975) IEEE 200 $6.00 Designed Vehicle and Armed Guards for Road Shipment of Designs (6/76)
ught Nickel-Rich, Chromium-Bearing Alloys, Method of (/ Mass Spectrometer Helium Leak Reactor Coolant Pressure Boundary Leakage say for Plutonium in Scrap Material by Spontaneous Fission Fission Type Neutron Testing for Leaks Using the Mass Spectrometer Leak Tests for Leaks Using the Mass Spectrometer Leak Neutron Activation Selection of Neutron Activation Testing for Leaks Using the Mass Spectrometer Leak for Leaks Using the Mass Spectrometer Leak Detector in the BF3 Gamma Tolerant Neutron Electrical Continuity Type Liquid Metal Leak nded Practice for Testing for Leaks Using the Halogen Leak Testing of High Temperature Cable for Nuclear 300-1969 (Agrees with IEC 333)/ Semiconductor Radiation Amplifiers and Preamplifiers for Semiconductor Radiation Geranium Gamma-Ray ellet Homogeneity by Use of an Electron Microprobe (9-1/ (1973) ASTM E320-1970 $1.75 Methods for Radiochemical Standard Method for (1970) $1.75 Radiochemical
Design, and Plant Protection for an Independent Spent F Design, Construction, and Use of Radioisotopic Power Ge Design, Fabrication and Erection of Structural Steel Fo Design, Testing, and Maintenance Criteria for Atmospher Detecting Embrittlement, Rec. Practice for (1974) $1.75 Detecting Susceptibility to Intergranular Attack in Sta Detecting Susceptibility to Intergranular Attack in Wro Detection for Instruments and Small Components (2-72) Detection Systems (5/73) Detection (6/74)
Detector Assembly (12-71) Amendment 1 (10-73) Detector in the Detector Probe Mode (1973) $1.75 Detector in the Inside-Out Testing Mode (1973) $1.75 Detector Materials, Guide for Selection of (1973) $1.75 Detector Materials, Guide for (1974) ASTM E419-1973 $1 Detector or Residual Gas Analyzer in the Tracer Probe M Detector Probe Mode (1973) $1.75
Detector Tubes (12-75) Supersedes C15-11T, (8-72) Detector (10-72) Amendment 1 (6-73) Detectors (Alkali-Ion Diode) (1971) $1.75 Detectors (8-71)
Detectors, Test Procedures for (1968) (R1974) IEEE Std. Detectors, Test Procedures for (1969) IEEE Std. 301-19 Detectors, Test Procedures for (1972) IEEE Std. 325-19 Determination of a Figure of Merit for PuO,-UO, Fuel P Determination of Cesium-137 in Nuclear Fuel Solutions Determination of Cesium-137 in Nuclear Fuel Solutions, Determination of Chemical Composition (1972) $1.75 Determination of Corrosivity of Adhesive Materials (197 Determination of Fission Zirconium in Irradiated Nuclea Determination of Fuel Pellet Homogeneity by Alpha-Auto Determination of Insulation Compaction in Ceramic Insul Determination of Precision of Methods of Committee D-1 Determination of Pulse Velocities and Ultrasonic Elasti Determination of Sodium in Water by lon Selective Elect Determination of Sound Transmission Class (1973) $1.75 Determination of the Mechanical Properties (1973) ASTM Determination of the Mechanical Properties, Rec. Practi Determination of Uranium in Aqueous Solutions Standard Determination of Uranium in Aqueous Solutions (1973) as Determination of (1975) ANS 19.3 $7.50 Determinations (12/74)
/ the Analysis of Uranyl Nitrat NRC Determine Nil-Ductility Transition Temperature of Ferr ANSI
Unfired Pressure Vessel Flange ng for Leaks Using the Halogen Leak Detectors (Alkali-lon Methods for the Accountability of Plutonium Specification for Nuclear Grade Sinterable Uranium Specification for Nuclear Grade Sinterable Plutonium Specification for Nuclear Grade, Sinterable Uranium Specification for Nuclear Grade, Sinterable Uranium c, and Spectrochemical Analysis of Nuclear Grade Plutonium ric, and Spectrochemical Analysis of Nuclear Grade Uranium ic, and Spectrochemical Analysis O/ Nuclear Grade Uranium ic, and Spectrochemical Analysis/ Nuclear Grade Plutonium Spectrometric, and Spectrochemical Analysis of / Uranium Spectrometric, and Spectrochemical Analysis O/ Plutonium Fast Flux Test Facility Ceramic Grade Plutonium Ceramic Grade Uranium Safeguarding Against Embrittlement of Hot Providing High Quality Zinc Coatings (HotZinc-Coating (HotZinc Coating (Hot lection Method, Using Pulsed Longitudinal Waves Induced by .71 Oxygen Content Using a 14-MeV Neutron Activation and tm/ Oxygen Content Using a 14-MeV Neutron Activation and em (7-71) or X and Gamma Radiation, Performance, Specification For/ onditions (1973) (ASTM D3080-1972) S/ Method of Test for astm D2936-1971) $1.75 Method of Test for (2/26/73)
stm A385-196/
74) ASTM A386-1973 $1.75 3) $1.75
Determining Inclusion Content of Steel, Recommended Pra ASTM Determining the Maximum Use Temperature of Preformed in ANSI Determining (1962) (R1968) $1 75 ¡Vity of Inorganic Ma ASTM Deuterium Oxide (1973) $1.75 Test ASTM Deuterium Oxide, Method of Test for (1973) ASTM D2033- ANSI Deuterium Oxide, Method of Testing (1973) ASTM D2184-1 Deuterium Oxide. Specification for (1973) ASTM D2032-i Deuterium Oxide, Spec. for (1968) (R1975) $1.75 Deuterium Oxide, Standard Method of (1972) $1.75 Development of Radiation Protection Stds. (1960) Development of Radiation Protection Std. (1961) Development of Radiation (1964)
Development of Technical Specifications for Experiments Development of Technical Specifications for (1974) ANS- Device (Or Multipurpose Sampler) for the Analysis of No Devices for Removal of Particles (1972) $2.50 Devices for Removal of Particles (1/73) Devices to Be Distributed for Use Under General License Devices (10/73)
Devices (1968) $1.50
Devices (3-69) Amendment 1 (10-71)
Devices), Graphic Symbols for (1973) IEEE 91-1973 $6.0 Diagnostic X-Ray Systems and Their Major Components (19 Diagrams Sold Separately $1.75
Diagrams (Two State Devices), Graphic Symbols for (1973 Diagrams (1966) Includes Supplements Y14.15a and Y 14.15 Diagrams, Graphic Symbols for (1975) IEEE 315-1975 $8. Diameter and Permeability of Rigid Porous Filters for L Diameter Austenitic Stainless Steel Tubing (ASTM a 632 Diameter Light-Wall Austenitic Chromium Nickel Alloy S Diameter (ASME SA-358 with Additional Requirements) (4 Diameter) for General Service (1974) ASTM A632-1969 $1 Diatoms (1973) $1.75
Die and Hand Forgings (1974) ASTM B247-1973 $1.75 Die and Hand Forgings, Specification for (1974) $1.75 Die Forgings (Hot Pressed) (1974) $1.75 Dielectric Tests, Techniques for (1968) (R1973) IEEE 4- Diesel Generator Set Capacity for Standby Power Supplie Diesel Generator Units Applied as Standby Power Supplie Differences in the Transfer of Special Nuclear Material Differences in the Transfer of Special Nuclear Material Differential Pressure Transmitter, Pneumatic or Electri Diffraction and Fluorescence Analysis Equipment (1971) Diffusion Carbon Meter for Service in Liquid Sodium (1- Diffusivity of Carbon and Graphite by a Thermal Pulse M Diffusivity of Carbon and Graphite by a Thermal Pulse M Digital Computer Programs (1971) $7.50 Digital Computer Programs (1974) ANS 10.3 $8.50 Dimensional Characteristics (8-73)
Dimensional Consolidation Properties of Soils (1972) (A Dimensioning and Tolerancing for Engineering Drawings ( Dimensions of Ferrous Valves (1973) $4.00 Dimensions of Plastic Pipe Fittings, Symbols for (1968) Dimensions (1969) $4.00
Diode) (1971) $1.75 Dioxide Powder (12/74)
Dioxide Powder (1973) $1.75 Dioxide Powder (1974A) $1.75 Dioxide Powder (1974) ASTM C753-1973 $1.75 Dioxide Powder (1975) ASTM C757-1974a $1.75 Dioxide Powders and Pellets and Nuclear Grade Mixed Oxi Dioxide Powders and Pellets (2/9/73) / Mass Spectromet NRC Dioxide Powders and Pellets, Chemical, Mass Spectrometr Dioxide Powders and Pellets, Chemical, Mass Spectrometr Dioxide Powders and Pellets, Methods for Chemical, Mass Dioxide Powders and Pellets, Methods for Chemical, Mass Dioxide (6-71)
Dioxide (6-71) Amendment 1 (12-74)
Dip Galvanized Structural Steel Products and Procedure Dip) on Assembled Products, Specification for (R1973) a Dip) on Assembled Steel Products, Specification for (19 Dip) on Iron and Steel Hardware, Specification for (197 Direct Contact, Practice for (1969) (R1973) ASTM E114- Direct Counting Technique, Method of Test for (1973) $1 Direct Counting Technique, Method of Test for (1974) as Direct Current Power Range Neutron Flux Monitoring Syst Direct Reading and Indirect Reading Pocket Dosimeters F Direct Shear Test of Soils Under Consolidated Drained C Direct Tensile Strength of Rock Core Specimens (1972) ( Direct-Reading and Indirect-Reading Pocket Dosimeters Discharge System (6/75) Discharge Tubes (1975) $2.95 Discontinuities, Method for (1974) $1.75 Dispersion in Natural Water Bodies (5/74)
Dispersion of Effluents from Accidental and Routine Rea Dispersion of Gaseous Effluents in Routine Releases Fro
« PreviousContinue » |