ure Application at High Temperatures, 1.75

Shielded Shipping Silver Brazing Joints for Centrifugally Centrifugally 150 lb. Corrosion Resistant 150 lb. Corrosion Resistant

Spec/ Centrifugally Chemical Analysis of Steel, 4-76) Supersedes M3-31T/ Stainless Steel Centrifugally Spec. for Copper Alloy Sand 74) Ast/ Specification for Special Requirements for Steel Specification for Special Requirements for (1973/ Steel aphs for (1973) $1.75 Steel -75) Supersedes M4-1T, (7-71) Carbon Steel 1-74) Supersedes M4-2T, (6-/ Austenitic Stainless Steel 75) Supersedes M4-5/ Nickel-Molybdenum-Chromium Alloy radiographic Inspection Method, Quality Standard for Steel cle Magnetic Inspection Method, Quality Standard for Steel Visual Method, Quality Standard for Steel ence Radiographs for Heavy Walled (4-1/2 to 12 in.) Steel rence Radiographs for Heavy Walled (2 to 4-1/2 in.) Steel Depleted Uranium Cobalt-Chromium Alloy E125-1963 $1./ Magnetic Particle Indications on Ferrous -Beam Ultrasonic Inspection of Carbon and Low Alloy Steel Titanium and Titanium Alloy Radioactive Waste Testing of Reinforcing Bars for Mechanical (Cadweld) Splices in Reinforcing Bars of Design Limits and Loading Combinations for Seismic Additional Information: Design of Seismic Concrete Placement in ance Std. (Ionizing Radiation Emitting Products) for ColdStopping Powers for Use with High Efficiency Gas Phase Adsorber Sponge and Expanded Fineness of Portland Time of Setting of Hydraulic

ty G/

Carbon, Definition of Terms Relating to (1974) $1.75
Carbon, Ferritic Alloy and Austenitic Alloy Steel Tubes
Carbon, Ferritic, and Austenitic Alloy Steel Heat Excha
Carbon, Test for (1970) $1.75
Carbon, Test for (1970) $1.75
Carbon, Test for (1970) $1.75
Carbon, Test for (1970) $1.75

Care and Operation of Heating Boilers (1977) bd ($25.00
Care of Power Boilers (1977) bd ($25.00), II ($30.00)
Cargo Vessels (Ships and Barges) (1975) $1.95
Carrier DC Arc Technique, Method for Spectroc
Carrier D-C Arc Technique, Method for Spectroc. I
Carriers Regulations (1975) $6.80

Carriers Regulations (1975) $6.80

Ecial C USCG

46CFR99

an

ANSI

Z128.27

ASTM

E402

DOT

49CFR 174

DOT

49CFR :75

Case Acceptability: ASME Section III Design and Fabrica Case Acceptability: ASME Section III Materials (Revisio Cases and Crates, Testing (1973) $1.75

NRC

RG 1.84

NRC

RG 1.85

ASTM

D1083

RG 1.70.13

ERDA

RDT F9-4T

Cases Applicable to Reactor Coolant Pressure Boundary C
Cases 1592, 1593, 1594, 1595, and 1596) Supersedes F9-
Cases 1592, 1593, 1594, 1595, and 1596) (Revision 1, 6/
Cask for Spent Reactor Fuel Elements (8-73) Amendment
Cast and Wrought Solder Joint Fittings (1970) $3.00
Cast Austenitic Steel Pipe for High Temperature Service
Cast Bronze Solder Joint Fittings for Sovent Drainage S
Cast Ferritic Alloy Steel Pipe for High Temperature Ser
Cast Flanged Valves (1959) $3.00

Cast Flanges and Flanged Fittings (1965) $3.00
Cast Iron Gate Valves, Flanged and Threaded Ends (1970)
Cast Iron Swing Check Valves, Flanged and Threaded Ends
Cast Iron-Chromium-Nickel High Alloy Tubing for Press
Cast Iron, Open-Hearth Iron, and Wrought Iron (1975) $
Cast Pipe (ASME SA-451 with Additional Requirements) (
Castings for General Applications (1974) $1.75
Castings for Nuclear and Other Special Applications (19
Castings for the Nuclear and Other Special Applications
Castings Up to 2 Inches in Thickness, Reference Radiogr
Castings (ASME SA-216 with Additional Requirements) (8
Castings (ASME SA-351 with Additional Requirements) (1
Castings (ASTM a 494 with Additional Requirements) (10-
Castings (1971) $2.00
Castings (1971) $3.00
Castings (1971) $8.00

Castings (1973) ASTM E280-1972 $1.75
Castings (1974) ASTM E186-1973 $1.75
Castings (1975) $3.00

ASTM ERDA

RG 1.87

Cement Concrete, Method of Test for (1964) (R1969) ASTM
Cement Concrete, Method of Test for (1974) $1.75
Cement Grouting for Prestressing Tendons in Containment
Cement Mortars (Using 2-in (50-mm) Cube Specimens), T
Cement (ASTM C 449 with Additional Requirements) (10-7
Cement-Aggregate Combinations (Mortar-Bar Method), Te
Cement, Methods for (1970) ASTM C114-1969 $1.75
Cement, Specification for (1970) $1.75

Central Station Service. Specification for (1974) $1.75
Centrifugal Free Surface, Sodium Pump with Electrical D
Centrifugal Pump (2-72) Amendment 1 (5-74)
Centrifugal Pump (6-72) Amendment 1 (5-74)
Centrifugal Pump (7-72) Supersedes E3-3T, (10-70), a
Centrifugal Pumps (1965) $5.00
Centrifugally Cast Austenitic Steel Pipe for High Tempe
Centrifugally Cast Ferritic Alloy Steel Pipe for High T
Centrifugally Cast Iron-Chromium-Nickel High Alloy Tu
Centrifugally Cast Pipe (ASME SA-451 with Additional R
Ceramic Electrical Insulators (8-74) Supersedes C18-1
Ceramic Grade Plutonium Dioxide (6-71)
Ceramic Grade Uranium Dioxide (6-71) Amendment 1 (12-
Ceramic Insulated Conductors (8/70) Amendment 1 (9/73)
Ceramics for Electrical and Electronic Applications (19

NRC

C311

1970 $1.75

for (1970) $1.75 aining (1974) $3.50

Radioactive Radioactive

Methods for Radiochemical Determination of
Radiochemical Determination of
Cobalt-60 and

Std. Specifications for Electric Std. Specifications for Hand Operated Std. Specifications for Manually Lever Operated ) Amendment 1 (8-73, Amend/ Gamma Compensated lonization Stopping Powers for Use with Cavity posed to High Energy Radiation, Rec. Practice for Determ/ Physical Agents in the Workroom Environment with Intended Wide Range (10 Decade) Neutron Flux Monitoring

s (1969) ASTM E317-/ Practice for Evaluating Performance Requirements for Inspection of Dimensional fiber Electrometer Type Dosimeters and Companion Dosimeter Stainless Steel Cast Iron Swing Photometric Methods for

1973) ASTM C560-1969 $1.75

5) $1.75

Design, C NRC NRC

Ceramic-Insulated Magnet Wire (7-70)
Ceramographic Preparation Cf Mixed Oxide Fuel Pellets (
Ceric Sulfate Dosimeter. Method of Test for (1973) (Ast
Certain Devices to Be Distributed for Use Under General
Certain Land and Sea Applications (3/74)
Certain NRC Requirements Over Radioactive Material Ship
Certification of Particulate Clean Rooms (1970) $5.00
Certification, Recommended Practice for $10.50
Cesium in Water, Method of Test for (1973) ASTM D2577-
Cesium in Water, Test for (1972) $1.75

Cesium-137 in Nuclear Fuel Solutions (1973) ASTM E320-
Cesium-137 in Nuclear Fuel Solutions, Standard Method
Cesium-137 Teletherapy Equipment, Guidelines for Maint
Chain Hoists (1971) $0.50
Chain Hoists (1974) $0.50
Chain Hoists (1974) $0.50
Chamber Assembly (Fixed Electrical Compensation) (7-71
Chambers (1961) $2.00

RG 6.3

RG 75

CS-6T

IES

ANSI N117

Changes in Chemical Reactivity of Inorganic Material Ex
Changes (1975) $.75
/Alues for Chemical Substances and ACGIH
Channel (2-71)

methods for (1973) (ASTM E195-1968) $1.75 n, and Wrought Iron (1975) $1.75

(1973) $1.75 ASTM D2187/ (1974) $1.75

Titanium and Titanium-Base Alloys, , and Other Similar Iron, Nickel, and Cobalt-Base Alloys, Zirconium and Zirconium-Base Alloys, silver-Cadmium Alloys, Methods for (1974) ASTM C760-1/ silver-Indium-Cadmium Alloys (1974) $1.75 Wrought Nonferrous Metals and Alloys for Determination of th Lens Gaskets (1968) $4.00 High Pressure 1971 $1.75 Potential Reactivity of Aggregates Methods of Test for Physical and Tests for Physical and gh Energy Radiation, Rec. Practice for Determ/ Changes in ear Power Plant Control Room During a Postulated Hazardous Environment with Intended Ch/ Threshold Limit Values for Hygienic Guides (For Hazard Evaluation of Industrial Uranium Dioxide Powders and Pellets, Methods for Plutonium Dioxide Powders and Pellets, Methods for Nuclear Grade Mixed Oxides ((U,Pu)O(,)), Methods for sis Of, and Physical Tests on (/ Beryllium Oxide Powders, sis O/

Nuclear Grade Uranium Dioxide Powders and Pellets, Nuclear Grade Plutonium Dioxide Powders and Pellets, SIS of (1974) S/ Nuclear Grade Mixed Oxides ((U,Pu)O(,)), sis of, and Physical Tests on (/ sis of (1975) $1.75

Beryllium Oxide Powders, Nuclear Grade Boron Carbide, Standard Methods for Standard Methods for nd Radiochemical Analysis of Nuclear Grade Plutonium Nit/ and Radiochemical Analysis of Nuclear Grade Plutonium Me/ grade Plutonium Nitrate Solutions. Methods for (1974) As/ and Radiochemical Analysis of Uranium Hexafluoride, Meth/ and Radiochemical Analysi/ Nuclear Grade Plutonium Metal, and Radiochemical, Analysis of (19/

sis of Nuclear Grade Uranium Dioxid/ sis of Nuclear Grade Plutonium Diox/

Chemical Analysis of Nickel (1975) $1.75

ASTM

E183

1

ERDA

RDT C15-2T

Chemical Analysis of Nickel-Chromium and Nickel-Chrom
Chemical Analysis of Reactor and Commercial Columbium (
Chemical Analysis of Reactor and Commercial Columbium,
Chemical Analysis of Steel, Cast Iron, Open-Hearth Iro
Chemical Analysis of (1971) $1.75
Chemical Analysis of (1973) $1.75
Chemical Analysis of (1974) $1.75
Chemical and Spectrochemical Analysis of Nuclear Grade
Chemical and Spectrochemical Analysis of Nuclear Grade
Chemical Composition (1972) $1.75

Chemical Industry Flanges and Threaded Stubs for Use Wi
(Chemical Method), Method of Test for (1973) ASTM C289-
Chemical Properties of Particulate Ion Exchange Resins
Chemical Properties of Particulate Ion Exchange Resins
Chemical Reactivity of Inorganic Material Exposed to Hi
Chemical Release (6/74)
/Ting the Habitability of Nucl
Chemical Substances and Physical Agents in the Workroom
Chemicals and Materials) (1955-1975) $1.00 ea.
Chemical, Mass Spectrometric, and Spectrochemical Analy
Chemical, Mass Spectrometric, and Spectrochemical Analy
Chemical, Mass Spectrometric, and Spectrochemical Analy
Chemical, Mass Spectrometric, and Spectrochemical Analy
Chemical, Mass Spectrometric, and Spectrochemical Analy
Chemical, Mass Spectrometric, and Spectrochemical Analy
Chemical, Mass Spectrometric, and Spectrochemical Analy
Cheinical, Mass Spectrometric, and Spectrochemical Analy
Chemical, Mass Spectrometric, and Spectrochemical Analy
Chemical, Mass Spectrometric, and Spectrochemical Analy
Chemical, Mass Spectrometric, and Spectrochemical Analy
Chemical, Mass Spectrometric, Spectrochemical Nuclear a
Chemical, Mass Spectrometric, Spectrochemical, Nuclear
Chemical, Mass Spectrometric, Spectrochemical, Nuclear
Chemical, Mass Spectrometric, Spectrochemical, Nuclear
Chemical, Mass Spectrometric, Spectrochemical, Nuclear
Chemical, Mass Spectrometric, Spectrochemical, Nuclear
Chemical, Mass Spectrometric, Spectrochemical, Nuclear
Chemistry Laboratories for Control Rod Absorber Materia
Chemistry Laboratories for Mixed Oxide Fuel Analysis (7
Chemistry Methods for Boron Carbide Absorber Material (
Chemistry Methods for Metallic Core Components (9-75)
Chemistry Methods for Mixed Oxide Fuel (7-73) Amendmen
Child Labor Regulations Section 57 Exposure to Radioact
Chloride Fire Extinguishing Agent (12-73)
Chloride lon in (1974) $1.75

Chlorides Present as Admixes in Graded Aggregate Road M
Chlorinated Aromatic Hydrocarbons (Askarels) by Refluxi
Chlorine Compounds in Chlorinated Aromatic Hydrocarbons
Chlorine in Waste Water (1974) $1.75

Chlorine in Water (1974) $1.75

Z111.11

Nickel-IronSpecification for Nickel-IronNickel-Molybdenum

th Additional Requirements) (7-75) /
ith Additional Requirements) (7-75) Super/
ional Requirements) (4-76) Supersed/
tional Requirements) (1/-75) Supers/
1 Requirements) (7-75) Supersedes M/
4) $1.75

Nickel-IronNickel-Molybdenum Nickel-Molybdenum Nickel-Molybdenum Specification for Nickel-IronSpecification for Nickel-IronCorrosion-Resisting Corrosion-Resisting Flux Core Corrosion-Resisting re Electrodes, Specification for (1/ Corrosion-Resisting re Electrodes, Specification for (1/ Corrosion-Resisting Chemical Analysis of Nickeltem/ Welded Large Outside Diameter Light-Wall Austenitic on for (1974A) $1.75 Corrosion-Resisting or (1975) $1.75 Stainless and Heat Resisting ptibility to Intergranular Attack in Wrought Nickel-Rich, 168 with Additional Requirements) (1-75) Supers/ Nickeltion for (1973) ASTM B168-1970 $1.75 Nickelitional Requirements) (3-75) Supersedes M7-4T,/ NickelB167-1970 $1.75 Specification for NickelNickel-Molybdenum Helical Age-Hardenable NickelChemical Analysis of Nickel-Chromium and NickelStrip, Specification for (1973) (ASTM B443-197/ NickelStrip 5597 with Additional Requirements) (8-75/ Strip (AMS 5596 with Additional Requirements) (/ ms 5589 with Additional Requirements) (7-75) Su/ ms 5590 with Additional Requirements) (8-75) Su/ lectrodes (6-75) Supersedes M1-19T, (3-75)

ctrodes, Specification for (1973) A/ ctrodes, Specification for (1974) 3.50

(1973) ASTM B434-1971 $1.75 (2-73)

tion at High Temperatures, Spec/ p for Fusion-Welded Unfired Pressure Ves/ ecification for (1974A) $1.75 ification for (1973) A/ ification for (1974)

Nickel

Nickel

Nickel

Nickel

Nickel

Pressure Vessel Plates, Alloy Steel, pressure Vessel Plates, Alloy Steel, Quenched and Tempered service, Specificati/ Electric-Fusion-Welded Austenitic Centrifugally Cast IronHeat Resisting Stainless Corrosion-Resisting Chromium and Corrosion-Resisting Chromium and Corrosion-Resisting Chromium and Stainless and Heat Resisting Corrosion-Resisting Chromium and , Specification for (1/ Corrosion-Resisting Chromium and Steel, Quenched and Tempered, Nickel-Cobalt-Molybdenum 72A) A/ Pressure Vessel Plates, Alloy Steel, Five Percent s and Electrodes (9-75) Amendment 1 (1/ luxes for Submerged Arc Welding (9-75) me SA-387 with Additional Requirements/ ubes (ASME SA-213 with Additional Requ/ forgings (ASME SA-336 with Additional /

Flux Core cation for (1974) $1.75 Specification for (1/

0

$1.75

2-1/4-Percent

2-1/4-Percent

2-1/4-Percent

2-1/4-Percent2-1/4-PercentAlternating Current Power standard Criteria for Separation of Class IE Equipment and purities (1-76) Supersedes E4-ST, (12-70) Forced Fans, Blowers, and Compressors for Dry Gas Corrosion-Resisting Chromium Steel Stainless Chromium-Nickel Steel Straight-Beam Ultrasonic Examination of Plain and Nickel and Nickel-Base Alloy properties (197/ Practice for Examination of Fuel Element properties, Rec. Practice for Examination O/ Fuel Element Control of Stainless Steel Weld Fast Flux Test Facility Driver Fuel Pin Seamless

$1.75

on Fo/

Chromel-P Versus Alumel, Stainless Steel Sheathed, Mag
Chromium Alloy Bare Welding Rods and Electrodes (7-75)
Chromium Alloy Bars and Shapes (4-75) Supersedes M7-7
Chromium Alloy Bars, Forgings, and Forging Stock (ASME
Chromium Alloy Castings (ASTM a 494 with Additional Req
Chromium Alloy Castings (7-75) Supersedes M4-3T, (6-
Chromium Alloy Forgings (ASME SA-182 with Additional R
Chromium Alloy Plate, Sheet, and Strip (ASME SB-409 Wi
Chromium Alloy Plate, Sheet, and Strip, Specification F
Chromium Alloy Rod and Bar (ASME SB-336 with Additiona
Chromium Alloy Rod and Bar (ASME SB-408 with Additiona
Chromium Alloy Rod and Bar, (1974) ASTM B408-1973 $1.7
Chromium Alloy Seamless Pipe and Tubes (ASME SB-167 Wi
Chromium Alloy Seamless Pipe and Tubing (ASME SB-407 W
Chromium Alloy Seamless Tubes (ASME SB -163 with Addit
Chromium Alloy Sheet and Plate (ASME SB -434 with Addi
Chromium Alloy Welded Pipe (ASME SA-358 with Additiona
Chromium Alloy (UNS N08800) Rod and Bar, (1974) $1.75
Chromium Alloy (UNS N08800) Seamless Pipe and Tube (197
Chromium and Chromium-Nickel Steel Covered Welding Ele
Chromium and Chromium-Nickel Steel Covered Welding Ele
Chromium and Chromium-Nickel Steel Electrodes (1974) $
Chromium and Chromium-Nickel Steel Welding Rods and Ba
Chromium and Chromium-Nickel Steel Welding Rods and Ba
Chromium and Nickel-Chromium-Iron Alloys (1973) $1.75
Chromium Nickel Alloy Steel Pipe for Corrosive or High
Chromium Steel Clad Plate, Sheet and Strip, Specificati
Chromium Steel Plate, Sheet, and Strip, Specification F
Chromium-Bearing Alloys, Method of (1973) ASTM G28-19
Chromium-Iron Alloy Plate, Sheet, and Strip (ASME SB-
Chromium-Iron Alloy Plate, Sheet, and Strip, Specifica
Chromium-Iron Alloy Rod and Bar (ASME SB-166 with Add
Chromium-Iron Alloy Seamless Pipe and Tube (1973) ASTM
Chromium-Iron Alloy Sheet and Plate, Specification for
Chromium-Iron Alloy Springs (5-75) Supersedes M8-IT,
Chromium-Iron Alloys (1973) $1.75
Chromium-Molybdenum-Columbium Alloy Plate, Sheet, and
Chromium-Molybdenum-Columbium Alloy Plate, Sheet, and
Chromium-Molybdenum-Columbium Alloy Plate, Sheet, and
Chromium-Molybdenum-Columbium Alloy Seamless Tubes (A
Chromium-Molybdenum-Columbium Alloy Seamless Tubes (A
Chromium-Molybdenum-Columbium Bare Welding Rods and E
Chromium-Molybdenum, Specification for (1974A) $1.75
Chromium-Molybdenum, Specification for (1974) $1.75
Chromium-Nickel Alloy Steel Pipe for High Temperature
Chromium-Nickel High Alloy Tubing for Pressure Applica
Chromium-Nickel Stainless Steel Plate, Sheet, and Stri
Chromium-Nickel Steel Clad Plate, Sheet, and Strip, Sp
Chromium-Nickel Steel Covered Welding Electrodes, Spec
Chromium-Nickel Steel Covered Welding Electrodes, Spec
Chromium-Nickel Steel Electrodes (1974) $3.50
Chromium-Nickel Steel Plate, Sheet, and Strip, Specifi
Chromium-Nickel Steel Welding Rods and Bare Electrodes
Chromium-Nickel Steel Welding Rods and Bare Electrodes
Chromium, Specification for (1973) ASTM A605-1972 $1.7
Chromium, 0.5 Percent Molybdenum, Specification for (19
Chromium, 1-Percent-Molybdenum Alloy Bare Welding Rod
Chromium, 1-Percent-Molybdenum Alloy Electrodes and F
Chromium, 1-Percent-Molybdenum Alloy Steel Plates (As
Chromium, 1-Percent-Molybdenum Alloy Steel Seamless T
Chromium, 1-Percent-Molybdenum Alloy Steel Tubesheet
Circuits, Surge Arresters for (1975) IEEE 28-1974 $5.0
Circuits, (Trial Std. Issued for Use and Comment) (1974
Circulation Cold Trap Assembly for Removal of Sodium Im
Circulation (4-73)

Clad Plate, Sheet and Strip, Specification for (1974A)
Clad Plate, Sheet, and Strip, Specification for (1974A)
Clad Steel Plates for Special Applications, Specificati
Clad Steel Plate, Specification for (1974A) $1.75
Cladding Including the Determination of the Mechanical
Cladding Including the Determination of the Mechanical
Cladding of Low Alloy Steel Components (5/73)
Cladding Tube (6-71)

Class MC Components for Nuclear Power Plant (1977) bd (
Class MC Nuclear Components (Supplement to ASME Boiler
Class (1973) $1.75

Class Components for Nuclear Power Plant (1977) bd ($
Class 1 Components in Elevated-Temperature Reactors (S
Class 1 Electrical Valve Operators for Nuclear Power Ge
Class 1 Motors Installed Inside the Containment of Nucl
Class 1 Nuclear Components (Supplement to ASME Boiler a
Class 1 Valves for Liquid Metal Service (5-75) Superse
Class E Control Switchboards for Nuclear Power Generat
Class E Electric Cables, Field Splices, and Connection
Class E Equipment and Circuits, (Trial Std. Issued for
Class 1E Equipment for Nuclear Power Plants (11/74)

Class E Power Systems for Nuclear Power Generating Sta
Class 1, Water to Water, Straight or U Tube (6-73)
Class 2 and 3 Components (2/75)

er-Cooled Nuclear Po/

ing the Construction icles (1972) $2.50 icles (1/73)

ctice for (1974) $1.75

Supersedes F5-1T, (3-69) Amendment ! (4-/

Tornado Design Quality Group Laminar-Flow

Testing and Certification of Particulate Method of Test for the Test for Buffering Action of Metal Total Immersion Corrosion Test for Soak Tank Metal Test for Rinsing Properties of Metal nents (2-72) Supersedes F5-IT, (3-69) Amendment 1 (4-/ Chemical Analysis of Industrial Metal Quality Assurance Requirements for Phase of Nuclear Power Plants (1973/ Efficiency Testing of Air Efficiency Testing of Air Nuclear Air Descaling and Cleaning and Design, Testing, and Maintenance Criteria for Atmosphere Information for Safety Analysis Reports: Reactor Water endment 1 (5-72), Amendment 2-(1-74) FFTF (4-73) Amendment 1 (1-74) Shield Plug and Materials and Inspection for Reactor Vessel Preloading Threaded Fasteners and Std. Spec. for High Temperature Glass 973) ASTM E11-1970 $1.75 Wire hod of Test for (19/ Resistance to Abrasion of Small Size 1.75 Scratch Hardness of Method of Test for Specific Gravity and Absorption of Sieve or Screen Analysis of Fine and Test for Hydrogen Permeability of Rubber Std. Spec. for Fully Cured Silicone Rubber Recommended Practice for Measuring Zinc Zinc Quality Assurance Requirements for Protective Quality Assurance for Protective Quality Assurance Requirements for Protective ng (R1973) ASTM C536-1/ Method of Test for Continuity of 1971 $1.75 Electrodeposited Itage ASTM C537-/ Method of Test for Reliability of Glass teel Shapes, Plates, Bars and Strip, Zinc (Hot Galvanized) n for (R1973) ASTM A385-196/ Providing High Quality Zinc Selection, Application, and Inspection of Protective Protective Protective

1971 $1.75 (1969) (R197/ electromagnetic) Test/ cation for (1974) ASTM A386-1973 $1.75 ation for (1973) $1.75 tonium Pro/

6/73)

inment Facilities (1972) $3.00
0

Test for Adhesion or Cohesive Strength of Flame-Sprayed
Measuring Neutron Flux Density by Radioactivation of
Std. Spec for Precipitation Hardening
Electrical, Magnetic, and Other Similar Iron, Nickel, and

ck for High Tempe/

es M7-7T, (7-71) 3T, (6-72)

Information for NRC
Class 2 Components for Nuclear Power Plant (1977) bd ($
Class 2 Nuclear Components (Supplement to ASME Boiler a
Class 2 Pressure Vessel (3-73)

Class 2 Valves for Liquid Metal Service (6-74) Superse
Class 2, Water to Water, Straight or U Tube (7-71)
Class 3 Components for Nuclear Power Plant (1977) bd ($
Class 3 Nuclear Components (Supplement to ASME Boiler a
Classification for Determination of Sound Transmission
Classification for Plutonium Processing and Fuel Fabric
Classification of Containment Properties of Sealed Radi
Classification of Nuclear Ships, Guide for the (1962) $
Classification of Soils for Engineering Purposes (1972)
Classification of Unirradiated Plutonium and Uranium Sc
Classification of (1970) $3.25
Classification of (1972) $4.25

Classification of (1975) NBS Handbook 116 $2.00
Classification System for (ASTM D2953-1971) (1973) $1.
Classification System for (1971) $1.75
Classification System for (1975) $1.75
Classification (Revision 2, 2/76)
Classification (1970) $3.00

Classification (6/76)

Classifications and Standards for Water-, Steam-, and Clay Lumps and Friable Particles in Aggregates, Method Clean Air Devices (1968) $1.50

Clean Rooms (1970) $5.00

Cleanability of Surface Finishes (1973) $1.75
Cleaners (1971) $1.75
Cleaners (1972) $1.75
Cleaners (1972) $1.75

Cleaning and Cleanliness Requirements for Nuclear Compo
Cleaning Compositions (1971) $1.75
Cleaning Fluid Systems and Associated Components of Wat
Cleaning of Fluid Systems and Associated Components Dur
Cleaning Systems Containing Devices for Removal of Part
Cleaning Systems Containing Devices for Removal of Part
Cleaning Systems, Testing of (1975) $5.00

RG 1.70.25

ASME

SEC-IIINC

Cleaning Titanium and Titanium Alloy Surfaces, Rec. Pra Cleanliness Requirements for Nuclear Components (2-72) Cleanup System Air Filtration and Adsorption Units of L Cleanup System (5/75)

Closed Loop in Reactor Assembly Fabrication (12-71) Am Closure Cap for Penetrations LMFBR Reactor Vessel Head Closure Studs (10/73)

Closures (2-69) Amendment 1 (10-71)

Cloth Pressure Sensitive Electrical Tape (1973) $1.75
Cloth Sieves for Testing Purposes, Specification for (1
Coarse Aggregate by Use of the Los Angeles Machine, Met
Coarse Aggregate Particles, Method of Test for (1968) $
Coarse Aggregate (1974) ASTM C127-1973 $1.75
Coarse Aggregates, Method of Test for (1973) ASTM C136-
Coated Fabrics (1973) $1.75

Coated Glass Fabric and Tapes for Electrical Insulation
Coating Thickness by Magnetic-Field or Eddy-Current (
Coating (Hot-Dip) on Assembled Steel Products, Specifi
Coating (Hot-Dip) on Iron and Steel Hardware, Specific
Coatings Applied to Fuel Reprocessing Plants and to Plu
Coatings Applied to Nuclear Facilities (1972) $3.00
Coatings Applied to Water Cooled Nuclear Power Plants (
Coatings in Glassed Steel Equipment by Electrical Testi
Coatings of Zinc on Steel, Specification for ASTM A164-
Coatings on Glassed Steel Reaction Equipment by High Vo
Coatings on Products Fabricated from Rolled, Specificat
Coatings (Hot-Dip) on Assembled Products, Specificatio
Coatings (Paints) for Fuel Reprocessing Plants (6/75)
Coatings (Paints) for Light Water Nuclear Reactor Conta
Coatings (Paints) for the Nuclear Industry (1974) $14.0
Coatings (1974) $1.75
Cobalt and Silver (1973T)
Cobalt Containing Alloy Bars, Forgings, and Forging Sto
Cobalt-Base Alloys, Chemical Analysis of (1973) $1.75
Cobalt-Chromium Alloy Bars and Shapes (4-75) Supersed
Cobalt-Chromium Alloy Castings (7-75) Supersedes M4-
Cobalt-60 and Cesium-137 Teletherapy Equipment, Guide
Code Case Acceptability: ASME Section III Design and Fa
Code Case Acceptability: ASME Section III Materials (Re
Code Cases Applicable to Reactor Coolant Pressure Bound
Code Cases 1592, 1593, 1594, 1595, and 1596) Supersedes
Code Cases 1592, 1593, 1594, 1595, and 1596) (Revision
Code Class 2 and 3 Components (2/75)
Code for Centrifugal Pumps (1965) $5.00
Code for Concrete Reactor Vessels and Containments (197

up/

Performance Test Safety Color Outdoor Apparatus Bushings, Requirements and Test Distribution, Power and Regulating Transformers, Test upp. A89.1A-1975 $13.50 Reinforced Concrete, Building und Edition $1200.00: Lo/ ASME Boiler and Pressure Vessel Structural Welding National Electrical Components (Supplement to ASME Boiler and Pressure Vessel Components (Supplement to ASME Boiler and Pressure Vessel Components (Supplement to ASME Boiler and Pressure Vessel Components (Supplement to ASME Boiler and Pressure Vessel lifications (Supplement to ASME Boiler and Pressure Vessel examination (Supplement to ASME Boiler and Pressure Vessel Identification of Piping Systems by Color Test for Relative Density of Tests for Unconfined Compressive Strength of Method of Test for Unconsolidated, Undrained Strength of Test for Adhesion or r Tubes, Specification for (1973) $1.75 Seamless ng Steel Bars and Shape/ Specification for Hot Rolled and Hot Rolled and Specification for Hot Rolled and

75

nd Wire for Nuclear Application, Specific/ nd Wire for Nuclear App/ ecification for (1972) $1.75 $1.75

tion for (1975) $1.75

vanadium, Specific/

Std. Spec. for Steel, Carbon,
Carbon Steel Sheet,

Steel Sheet and Strip, Hot Rolled and
Forced Circulation

76) Supersedes E4-5T, (12-70) 1966) $1.50

ment 1 (9/73)

Determination of Insulation tionship of Quartz-Fiber Electrometer Type Dosimeters and Protection System Calibration of Thermocouples by al Compensation) (7-71) Amendment 1 (8-73, Amend/ Gamma Compensated lonization Chamber Assembly (Fixed Electrical Radioactive Material/ Administrative Guide for Verifying eleases of Reactor Effluents for the Purpose of Evaluating ect to NRC Regulations (Revision 2, 8/75)

Food and Drugs: Notification of Defects or Failure to dment 1 (12-73), Amendment 2 (6-74) Mixing tl (3-74) Fabrication of Core Austenitic Stainless Steel Hexagonal Duct Tubes for Core Transportation of Critical Marking of

4)

Code for Displacement Pumps (1962) $4.00
Code for Marking Physical Hazards (1971) $3.00
Code for (1964) (R1970) IEEE 21-1964 $4.00
Code for (1973) (IEEE Std 262-1973), Including Draft S
Code Requirements for (1972) ACI 318-1971, Including S
Code-1977 Edition. Special Price for All Sections: Bo
Code (1975) $24.00
Code (1975) $5.50

Code, Section lii, Subsection NA and Nb) Supersedes E15
Code, Section lii, Subsection NA and Nc) Supersedes E15
Code, Section lii, Subsections NA and Nd) (3-75) Super
Code, Section lii, Subsections NA Ne) (8-75) Supersede
Code, Section IX) (8-74) Supersedes F6-5T, (7-71) Am
Code, Section V) (10-75) Supersedes F3-6T, (12-74) a
Coding, Scheme for the (1975) $3.00
Cohesionless Soils (1972) (ASTM D2049-1969) $1.75
Cohesive Soil (1972) (ASTM D1266-1972) $1.75
Cohesive Soils in Triaxial Compression (1972) (ASTM D28
Cohesive Strength of Flame-Sprayed Coatings (1974) $1.
Cold Drawn Low Carbon Steel Heat Exchanger and Condense
Cold Finished Age-Hardening Stainless and Heat Resisti
Cold Finished Zirconium and Zirconium Alloy Bars, Rod a
Cold Finished Zirconium and Zirconium Alloy Bars, Rod a
Cold Rolled Carbon Steel Sheets, Commercial Quality, Sp
Cold Rolled, Commercial Quality (1974) ASTM A366-1972
Cold Rolled, Drawing Quality, Special Killed, Specifica
Cold Rolled, High Strength, Low Alloy Columbium and/or
Cold Trap Assembly for Removal of Sodium Impurities (1-
Cold Weather Concreting, Practice for (1968) (ACI 306-
Cold-Cathode Gas Discharge Tubes (1975) $2.95
Collapsible Rotor, Roller Nut Control Rod Drive Mechani
Collection, Storage, and Maintenance of Nuclear Power P
Collection, Storage, and Maintenance of Quality Assuran
Color Code for Marking Physical Hazards (1971) $3.00
Color Coding, Scheme for the (1975) $3.00
Colorimetric Determination of Uranium in Aqueous Soluti
Colorimetric Determination of Uranium in Aqueous Soluti
Columbium Alloy Ingots (1973) ASTM B391-64 $1.75
Columbium Alloy Ingots, Specification for (1964) $1.75
Columbium Alloy Plate, Sheet, and Strip (AMS 5596 with
Columbium Alloy Plate, Sheet, and Strip 5597 with Addit
Columbium Alloy Plate, Sheet, and Strip, Specification
Columbium Alloy Seamless and Welded Tubes, Specificatio
Columbium Alloy Seamless Tubes (AMS 5589 with Additiona
Columbium Alloy Seamless Tubes (AMS 5590 with Additiona
Columbium Alloy Strip, Sheet, Foil, and Plate, Specific
Columbium and Columbium Alloy Ingots (1973) ASTM B391-
Columbium and Columbium Alloy Ingots, Specification for
Columbium and Columbium Alloy Seamless and Welded Tubes
Columbium and Columbium Alloy Strip, Sheet, Foil, and P
Columbium and/or Vanadium, Specification for (1973) Ast
Columbium Bare Welding Rods and Electrodes (6-75) Supe
Columbium Metal, Specification for (1973) ASTM B383-1
Columbium (1974) $1.75

/E O DOT /E O USCG

Columbium, Methods for (1973) (ASTM E195-1968) $1.75
Combinations for Metal Primary Reactor Containment Syst
Combinations for Seismic Category 1 Fluid System Compon
Combinations (Mortar-Bar Method), Test for (1971) $1.7
Combining Modal Responses and Spatial Components in Sei
Combustible Gas Concentrations in Containment Following
Combustible Gases and Vapors in Plutonium Processing an
Combustible Liquids on Board Vessels (1975) $7.50
Combustible Liquids on Board Vessels (1975) $7.50
Commercial Columbium (1974) $1.75
Commercial Columbium, Methods for (1973) (ASTM E195-19
Commercial Quality (1974) ASTM A366-1972 $1.75
Commercial Quality, Specification for (1972) $1.75
Commercial Uranium Enrichment Facilities (Revision 1, 1
Commitments of Material Resources (Revision 1, 6/76)
Commodity List of Hazardous Materials (1975) $6.80
Communication with Transport Vehicles (Revision 1, 5/75
Compaction in Ceramic Insulated Conductors (8/70) Amend
Companion Dosimeter Chargers (1965) (R1971) $3.00
Comparator (4-72) Amendment 1 (6-73)
Comparison Techniques (1972) $1.75
Compensated lonization Chamber Assembly (Fixed Electric
Compensation) (7-71) Amendment 1 (8-73, Amendment 2
Compliance with Packaging Requirements for Shipments of
Compliance with 10 CFR Part 50, Appendix I (3/76)
Complication of Reporting Requirements for Persons Subj
Comply (1975) $2.95

/Ela

/ER NRC

RG 1.109