Communication with
Fuel Shipping Container Tiedown for Truck
ions Experiment Resistance to Shock and Vibration in Truck

Transmitter, Pneumatic or Electric Output Signal (4-74
Transport and Dispersion of Gaseous Effluents in Routin
Transport Vehicles (Revision 1, 5,75)
Transport (1-75)
Transport (2-75)

76)

erials (1975) $5.00
Materials (1973) $3 50
Materials (6/74)

3) ACI 304-1973 $2.75

(5-73), Amendment 2 (1-74)
supersedes E4-5T, (12-70)
3) Supersedes M16-1T, (6-72)

Packaging and
Packaging and
ous Articles or Substances and Combustible Liquids on Bo/
pecial Construction, Arrangement, and Other Provisions for
175)
Evaluation of Explosions Postulated to Occur on
s Shipments, Administrative Guid/ Obtaining Department of
Additional Information: Nearby Industrial,
Measuring, Mixing,
Administrative Guide for Packaging and
Administrative Guide for
Uranium Hexafluoride for
Vapor
Forced Circulation Cold
Gas Phase Adsorbents for
Specifications for Electric Overhead
Running and Under Running Single Girder Electric Overhead
ssels (1974A/ Std. Spec. for Quenched and Tempered Vacuum
1975) $1.75
Pressure Vessel Plates, Heat
76) Supersedes / Carbon and Alloy Steel Forgings, Vacuum
trode or Vacuum Induction Melted 1950 F (1065.6C) Solution
or Vacuum Induction Melted 1750 F (954.4 C) Solution Heat
rode or Vacuum Induction Melted 1950 F (1065.6 C) Solution
or Vacuum Induction Melted 1750 F (954.4 C) Solution Heat
Base-19Cr-3.1 Mo-5.1 (Cb & Ta)-0.90Ti-0.50A1 Solution
sumable Electrode or Vacuum Induction Melted Solution Heat
and Fuel Fabrication Plants (6/73)
Liquid Waste
Test Vehicles for Transient Reactor Test Facility
dment 1 (8-73), Amendment 2 (3-74)
Instrument
or Unconsolidated, Undrained Strength of Cohesive Soils in
ecimens Without Pore Pressure Measurements (197/ Test for
raft Standard Evaluation of Anticipated Transients Without
1970 $1.75
Radioactive

6.50
1)

5

Fuel Shipping Container Tiedown for
radiations Experiment Resistance to Shock and Vibration in
Powered Industrial
Venturi Flow
plementary Requirements for Nickel Alloy Seamless Pipe and
requirements for (1970) $/ Nickel Alloy Seamless Pipe and
or Impedance and Absorption of Acoustical Materials by the
Test for Average Velocity in a Duct (Pitot
Specification for Nickel Seamless Pipe and
on for Nickel-Copper Alloy (UNS N04400) Seamless Pipe and
ication for Nickel-Chromium-Iron Alloy Seamless Pipe and
on for Aluminum Alloy Seamless Pipe and Seamless Extruded
ickel-Iron-Chromium Alloy (UNS N08800) Seamless Pipe and
Specification for Seamless Copper-Nickel Pipe and
Fast Flux Test Facility Driver Fuel Pin Seamless Cladding
Heat Exchanger, Class 1, Water to Water, Straight or U
Heat Exchanger, Class 2, Water to Water, Straight or U
Copper and Copper-Alloy Seamless Condenser
for (1974) ASTM B234 197/ Aluminum-Alloy Drawn Seamless
for (19/ Seamless and Welded Titanium and Titanium Alloy
edes E6-20T, /
Austenitic Stainless Steel Hexagonal Duct
974) $1.75
Seamless and Welded Carbon and Alloy Steel
Wrought Zirconium and Zirconium Alloy Seamless and Welded
Wrought Zirconium and Zirconium Alloy Seamless and Welded
arbon, Ferritic, and Austenitic Alloy Steel Heat Exchanger
Nickel-Chromium-Molybdenum-Columbium Alloy Seamless
Nickel-Chromium-Molybdenum-Columbium Alloy Seamless
Seamless Medium Carbon Steel Boiler and Superheater
ent-Chromium, 1-Percent-Molybdenum Alloy Steel Seamless
6) Supersedes M3-2T,/
Stainless and Alloy Steel Seamless
76) Supersed/ Nickel-Molybdenum-Chromium Alloy Seamless
5) Supersedes M3-4T, (1-74)
Nickel Alloy Seamless
5)/ Nickel-Molybdenum-Chromium Alloy Seamless Pipe and
Supersedes M3-8T, (5-70/ Zirconium and Zirconium Alloy
ce Inspection of Pressurized Water Reactor Steam Generator
BF3 Gamma Tolerant Neutron Detector
ne Booklet Priced at $3.00
Bases for GM Counter
pecification for Seamless Ferritic-Austenitic Alloy Steel
ation for Aluminum-Alloy Extruded Bars, Rods, Shapes, and
diation Emitting Products) for Cold-Cathode Gas Discharge
1/4-Percent-Chromium, 1-Percent-Molybdenum Alloy Steel
teel Boiler, (1974B) 1.75 Superheater, and Heat Exchanger
Carbon, Ferritic Alloy and Austenitic Alloy Steel
Columbium and Columbium Alloy Seamless and Welded
Electric-Resistance-Welded Carbon Steel Boiler

u/

u/

5) S/

a) $1./

Design Basis for Fuel and Irradiat ERDA
Transportation of Critical Components and Equipment (1-
Transportation of Dangerous Articles and Magnetized Mat
Transportation of Radioactively Contaminated Biological
Transportation of Radioactively Contaminated Biological
Transportation or Storage of Explosives or Other Danger
Transportation or Storage of Explosives or Other Danger
Transportation Routes Near Nuclear Power Plant Sites (1
Transportation Special Permits for Radioactive Material
Transportation, and Military Facilities (9/74)
Transporting and Placing of Concrete, Practice for (197
Transporting Radioactive Material (6/74)
Transporting Radioactive Materials (1973) $4.50
Transport, Packaging of (1971) $6.75
Trap Assemblies for Sodium Service (4-72) Amendment 1
Trap Assembly for Removal of Sodium Impurities (1-76)
Trapping Radioactive lodine and lodine Compounds (10-7
Traveling Crane (1971) $3.00

Traveling Cranes (1974) $3.00

ANSI

RDT F8-9T

ERDA

RDT F8-7T

N14.1

Treated Carbon and Alloy Steel Forgings for Pressure Ve
Treated Carbon-Manganese-Silicon, Specification for (
Treated (ASME SA-508 with Additional Requirements) (4-
Treated (1973) SAE AMS 5590-1966 $3.00 Base-19Cr-3.1
Treated (1973) SAE AMS 5596C-1968 $3.00
Treated (1973) SAE AMS 5597A-1967 $3.00
Treated (1973) SAE AMS 5662C-1972 $3.00
Treated (1973) (SAE AMS 5589-1966 $3.00
Treated (1975) $3.00
1-5.1 (Cb+Ta) 0.90Ti-0.50A1 Con SAE
Treatment System Design Guide for Plutonium Processing
(Treat) Experiments Containing Sodium (8-74)
Tree for Sodium Cooled Reactors (Fabrication Only) Amen
Triaxial Compression (1972) (ASTM D2850-1970) $1.75
Triaxial Compressive Strength of Undrained Rock Core Sp
Trip on Pressurized Water Reactor Plants (Issued for Tr
Tritium in Water, Method of Test for (1973) ASTM D2476-
Truck Identification Markings (1/74)
Truck Transport (1-75)
Truck Transport (2-75)

Design Basis for Fuel and Ir ERDA
Trucks Low Lift and High Lift, Safety Std. for (1975) $
Tube for Liquid Sodium (8-74) Supersedes C4-4T. (1-7
Tube for Nuclear Applications, Specification for (1971)
Tube for Nuclear Applications, Spec. for Supplementary
Tube Method (1972) $1.75
Tube Method) (1972) $1.75
Tube (1971) ASTM B167-1970 $1.75
Tube (1971) $1.75

Tube (1973) ASTM B167-1970 $1.75
Tube (1974) ASTM B241 1973 $1.75
Tube (1974) $1.75
Tube (1975) $1.75
Tube (6-71)
Tube (6-73)
Tube (7-71)

Tubes and Ferrule Stock, Specification for (1974A) $1.7
Tubes for Condensers and Heat Exchangers, Specification
Tubes for Condensers and Heat Exchangers, Specification
Tubes for Core Components and Assemblies (5-76) Supers
Tubes for Low Temperature Service, Specification for (1
Tubes for Nuclear Service, Specification for (1973) Ast
Tubes for Nuclear Service, Spec. for (1971) $1.75
Tubes with Integral Fins, Specification for (1973) $1.7
Tubes (AMS 5589 with Additional Requirements) (7-75) S
Tubes (AMS 5590 with Additional Requirements) (8-75) S
Tubes (ASME SA-210 with Additional Requirements) (7-7
Tubes (ASME SA-213 with Additional Requirements) (2-7
Tubes (ASME SA-213 with Additional Requirements) (4-7
Tubes (ASME SB -163 with Additional Requirements) (4-
Tubes (ASME SB-163 with Additional Requirements) (7-7
Tubes (ASME SB-167 with Additional Requirements) (7-7
Tubes (ASTM B 353 with Additional Requirements) (1-72)
Tubes (Revision 1, 7/75)

Tubes (12-75) Supersedes C15-1¡T, (8-72)
Tubes (1965) (R1971) $3.00 and N42.6 Are Contained in O
Tubes (1974) ASTM A669-1972 $1.75
Tubes (1974) ASTM B221-73 $1.75
Specific ANSI
Tubes (1975) $2.95
Performance Std. (Ionizing Ra BRH
Tubesheet Forgings (ASME SA-336 with Additional Requir
ERDA
Tubes, Specification for
/Ritic and Austenitic Alloy S ASTM
Tubes, Specification for General Requirements for (1974
ASTM
Tubes, Specification for (1973) ASTM B394-1970 $1.75
Tubes, Specification for (1973) $1.75

N42.5

75

74) $175

Seamless Medium Carbon Steel Boiler and Superheater
s Cold Drawn Low Carbon Steel Heat Exchanger and Condenser
c Steel Boiler, Superheater, Heat Exchanger, and Condenser
mless Nickel and Nickel Alloy Condenser and Heat Exchanger
Aluminum-Alloy Drawn Seamless
Seamless and Welded Austenitic Stainless Steel
Austenitic Stainless Steel
Ultrasonic Inspection of Metal Pipe and
andard Specification for Special Requirements for Pipe and
ification for (1974) A/ Special Requirements for Pipe and
pec Centrifugally Cast Iron-Chromium-Nickel High Alloy
75) Supersedes M3-51/ Austenitic Stainless Steel Welded
75) Super/ Nickel-Iron-Chromium Alloy Seamless Pipe and
mless and Welded Small Diameter Austenitic Stainless Steel
onsumable Electrode or Vacuum Induction Melted 195/ Alloy
ication for Seamless and Welded Austenitic Stainless Steel
ection of Longitudinal and Spiral Welds of Welded Pipe and
Electrode or Vacuum Induction Melted 1750F (954.4C) Alloy
Seamless Stainless Steel Mechanical
Tantalum and Tantalum Alloy
ification of Welding Procedures and Welders for Piping and
d in Plutonium Processing/ Nondestructive Examination of
(1973) ASTM E309-1971 $/ Eddy-Current Testing of Steel
Nondestructive Examination of

$3.00

$175

1973 $6.00

ations, Specification for (1967/
cations, Specification for (197/

-73)
-73)

Fineness of Portland Cement by the
Protection Against Low Trajectory
Logic Diagrams
sign and Use of (1975) $5.00
Shipping Packages for
(R1971)/
Interrelationship of Quartz-Fiber Electrometer
st of Electrical Grade Magnesium Oxide as Used in Sheathed
Eddy Current Probe
in Core Permanent Magnet Flow Through
Thermocouples, Sheathed,
Thermocouples, Sheathed,
Electrical Continuity
Fission
or (1970) $1.75
Thickness and Density of Blanket-
Maintenance, Testing, and Replacement of Large Stationary
lear Power Generating Stations, Trial Use/ Draft Standard
nd Connections for Nuclear Power Generating Stations (19/
inside the Containment of Nuclear Power Generating Stati/
Thickness and Density of Blanket-Type or Batt
Evaluating Stress Corrosion Effect of Wicking
73) ASTM C165-1/ Compressive Strength of Preformed Block
Density of Preformed Pipe Covering
Density of Preformed Block
g Load and Calculated Flexural Strength of Preformed Block
h Reactors (Revision 1,/
Quality Verification for Plate
.50
Quality Control for Plate-
lon Exchanger, Non Regenerative
Valve, Isolation. Butterfly
Martensitic Stainless Steel
Martensitic Stainless Steel

5

-74)

) (4-75) Supersedes M7-1T/
ements) (3-75) Supersedes'

and Waste Water, Identification of (1974) $1.75

I Pressure Measurement System, Flush Mounted, Eddy Current
1/76)

cification for (1973) $1.75

(1974) $1.75

-1969):

Straight-Beam
Longitudinal-Beam

Laboratory Determination of Pulse Velocities and
e for (1973) ASTM A388-1971 $175
or Special Applications, Specification Fo/
tings. Specification for (1973) ASTM
of Welded Pipe and Tubing (1969) ASTM E273-17 Method for
itudinal Discontinuities, Method for (1974) $1.75
els, Method and Inspection for (1974A
Longitudinal-Wave
Fabrication and Control of Steel Reference Blocks Used in
ngitudinal Waves (1974) Recommended Practice for Immersed
ed Longitudinal Waves induced by Direct Contact, Practic/
r (1974) $1.75

e for Evaluating Performance Characteristics of Pulse Echo
Definitions of Terms Relating to
Recommended Practice for
Statistical Evaluation of Material
(ASTM D1266-1972) $1 75
Tests for
(1972) (ASTM D2938-1971A) $1.75
Method of Test for
Triaxial Compression (1972) (ASTM D2/ Method of Test for
surements (197) Test for Triaxial Compressive Strength of
ssion (1972) (ASTM D2, Method of Test for Unconsolidated,
stainless Steel Plate, Sheet, and Strip for Fusion-Welded
tructures (Revision 2, 1/76)
Inservice Inspection of
Test for Elastic Moduh of Rock Core Specimens in
15.00

Seamles ASTM

A:79

Tubes. Specification for (1973) $1.75
Tubes. Specification for (1973) $1.75
Tubes. Specification for (1974A) $1.75
Tubes. Specification for (1974) $1.75
Tubes Specification for (1975) $1 75
Tubing for Genera. Service, Specification for (1974) $1
Tubing for LMFBR Core Components (5-72)
Tubing for Longitudinal Discontinuities, Method for (19)
Tubing for Nuclear and Other Special Applications (1973
Tubing for Nuclear and Other Special Applications. Spec
Tubing for Pressure Application at High Temperatures, S
Tubing (ASME SA-249 with Additional Requirements) (7-
Tubing (ASME SB-407 with Additional Requirements) (7-
Tubing (ASTM a 632 with Additional Requirements) (4-76
Tubing (Seamless, Corrosion and Heat Resistant Nickel C
Tubing (Small-Diameter) for General Service (1974) Ast
Tubing (1969) ASTM E273-1968 $1.75 /R Ultrasonic
Tubing, Seamless, Corrosion and Heat Resistant Nickel B
Tubing. Specification for (1974) $1.75
Tubing. Specification for (1974) $1.75
Tubing. Standard for (1969) $6.00
Tubular Products for Use in Fuel Reprocessing Plants an
Tubular Products with Magnetic Saturation, Practice for
Tubular Products (10/73)

Tungsten Arc Welding Electrodes (1969) $2.00
Tungsten Forgings-Pressed, Sintered, and Forged (1966)
Turbidimeter, Test for (1974) $1.75

Turbidity of Water, Standard Method of Tests for (1971)
Turbine Missiles (3/76)

(Two State Devices), Graphic Symbols for (1973) IEEE 91-
Type a Quantities of Radioactive Materials, Guide to De
Type Dosimeters and Companion Dosimeter Chargers (1965)
Type Electric Heating Elements (1970) $1.75
/D Life Te
Type Flow Sensor for Liquid Metal Service (6-73)
Type Flowmeter for Liquid Metal Service (4-73)
Type K for Nuclear or for Other High Reliability Applic
Type K, for Nuclear or for Other High Reliability Appli
Type Liquid Metal Leak Detector (10-72) Amendment 1 (6
Type Neutron Detector Assembly (12-71) Amendment 1 (10
Type or Batt-Type Thermal Insulating Materials, Test F
Type Power Plant and Substation Lead Storage Batteries,
Type Test of Class 1 Electrical Valve Operators for Nuc
Type Test of Class 1E Electric Cables, Field Splices, a
Type Tests of Continuous Duty Class I Motors Installed
Type Thermal Insulating Materials. Test for (1970) $1.7
Type Thermal Insulations on Stainless Steel (1971) $1.7
Type Thermal Insulation, Method of Test for (1963) (R19
Type Thermal Insulation, Test for (1972) $1.75
Type Thermal Insulation, Test for (1972) $1.75
Type Thermal Insulation, Test for (1972) $1.75
Type Uranium-Aluminum Fuel Elements for Use in Researc
Type Uranium-Aluminum Fuel Elements (1974) ANS 15.2 $8
Type (5-72)

Type (8-72)supersedes E1-13T, (12-70) Amendment 1 (5
(Type 403) Bars (ASTM a 276 with Additional Requirements
(Type 403) Forgings (ASME SA-182 with Additional Requir
Types of Microorganisms and Microscopic Matter in Water
Type, Inductive. Absolute or Gage (10-70) Amendment 1
Ultimate Heat Sink for Nuclear Power Plants (Revision 2
Ultrasonic Angle-Beam Examination of Steel Plates, Spe
Ultrasonic Contact Examination of Weldments Method for
Ultrasonic Elastic Constants of Rock (1972) (ASTM D2845
Ultrasonic Examination of Heavy Steel Forgings. Practic
Ultrasonic Examination of Plain and Clad Steel Plates F
Ultrasonic Inspection of Carbon and Low Alloy Steel Cas
Ultrasonic Inspection of Longitudinal and Spiral Welds
Ultrasonic Inspection of Metal Pipe and Tubing for Long
Ultrasonic Inspection of Steel Plates for Pressure Vess
Ultrasonic Inspection (1975) $1.75
Ultrasonic Testing by Reflection Method Using Pulsed Lo
Ultrasonic Testing by the Reflection Method, Using Puls
Ultrasonic Testing by the Resonance Method, Practice Fo
Ultrasonic Testing Systems (1969) ASTM E317-1968 $1.75
Ultrasonic Testing (1974) $1.75
Ultrasonic Velocity in Materials (1973) $1.75
Unaccounted for (6/74)

ASTM

Ended Practice for ASTM

Unconfined Compressive Strength of Cohesive Soil (1972)
Unconfined Compressive Strength of Rock Core Specimens
Unconsolidated, Undrained Strength of Cohesive Soils in
Undrained Rock Core Specimens Without Pore Pressure Mea
Undrained Strength of Cohesive Soils in Triaxial Compre
Unfired Pressure Vessel Flange Dimensions (1969) $4.00
Unfired Pressure Vessels, Specification for (1975) $1.7
Ungrouted Tendons in Prestressed Concrete Containment S
Uniaxial Compression (1972) $1.75

Unified Screw Threads (UN and UNR Thread Form) (1974) $

ASTM

E113

B16.30

$4.25

.25

(1963)

Standard Marking System for Valves, Fittings, Flanges and
Malleable Iron Threaded Pipe

Classification of
at and Content of License Applications for Storage Only of
Shared Emergency and Shutdown Electric Systems for Multi-
ncrete (1975) $1.75
Test for
Estimates and Evaluations of Fallout in the
Natural Background Radiation in the
er Generating Stations, /
Draft Standard Diesel Generator
Records and Reporting
or Atmosphere Cleanup System Air Filtration and Adsorption
Unified Screw Threads (UN and
1974) $1.75
Nickel-Copper Alloy
Specification for Nickel-Copper Alloy
Specification for Nickel-Iron-Chromium Alloy
Specification for Nickel-Iron-Chromium Alloy
Amendment 2 (11-75)
Preparation of
Thyroid Radioiodine
ances, Method of Test for (1973) ASTM E267-1970 $1.75
ances, Method of Test for (1970) $1.75

(1974) $1.75

Materials Protection Contingency Measures for
Test for Atom Percent Fission in
Method of Test for (1973) ASTM / Atom Percent Fission in
dard Method of Test for (1974) S/ Atom Percent Fission in
3) ASTM E321 / Method of Test for Atom Percent Fission in
est for (1970) $1.75

test for (1973) ASTM E217-1970 $1.75

Depleted
Specification for Nuclear Grade Sinterable
Specification for Nuclear Grade, Sinterable
Specification for Nuclear Grade, Sinterable
ectrometric, and Spectrochemical Analysis of Nuclear Grade
ctrometric, and Spectrochemical Analysis O Nuclear Grade

al, Mass Spectrometric, and Spectrochemical Analysis of /
Ceramic Grade

Preparation of Environmental Reports for Commercial
standard Format and Content of Safety Analysis Reports for
nuclear Material License Application (Including That for A
Nondestructive Assay of High Enrichment
Atom Percent Fission in
Atom Percent Fission in

(1973) ASTM E219-1969 $1.75
Test for (1974) $1.75
$6.75

$1.75
75

ods for the Measurement of Uranium Tetrafluoride (UF) and
$4.50
Accountability of
ctrochemical, Nuclear and Radiochemical, Analysis of (19/
ic, Spectrochemical, Nuclear and Radiochemical Analysis of
Colorimetric Determination of
Method for Colorimetric Determination of
Microquantities of
Guide to the Contents of Applications for
Preparation of Environmental Reports for
Design Stability of Embankment Retention Systems for
1-1960 and N7.1A-1973 $5.00
Radiation Protection in
Guidance for the Control of Radiation Hazards in
Method for Spectrochemical Analysis of (1972) ASTM E40/
ue, Method for Spectrochemical Analysis of (1970) $1.75

f6) 2/
$6.00

In Situ Assay of Enriched
Classification of Unirradiated Plutonium and
Unirradiated
Standard Analytical Methods for the Measurement of
Accountability of
Fast Neutron Flux by Analysis of Barium-140 Produced by
Applications of Bioassay for
ctors (Revision 1, /
Quality Verification for Plate-Type
Quality Control for Plate-Type
Stabilization of
Nondestructive

ilzation of (1974) $1.50

y (4/74)

t Neutron Flux by Analysis of Molybdenum-99 Activity from
t Neutron Flux by Analysis of Molybdenum-99 Activity from
for Measuring Fast Neutron Flux for Barium 140 Produced by
Fast Flux Test Facility
on, and Impurity Det/ General Methods for the Analysis of
lysis of (1975) $1.75
Nuclear Grade
3.1 Mo-5.1 (Cb+Ta) 0.90Ti-0.50A1 Consumable Electrode or
.1 (Cb+Ta)-0.90Ti-0.50A1-19-Fe Consumable Electrode or
IMO-5.1 (Cb & Ta)-0.90Ti-0.50A1 Consumable Electrode or
amless, Corrosion and Heat Resis/ Consumable Electrode or
1 Mo-5.1 (Cb & Ta)-0.90Ti-0 50A1 Consumable Electrode or
orrosion and Heat Resistant Nickel Consumable Electrode or
sure Vessels (1974A/ Std. Spec. for Quenched and Tempered

Unions (1964) $4.00

Unions 150, 250, and 300 lbs. (1970) $3.00
Unirradiated Plutonium and Uranium Scrap (12/20/72)
Unirradiated Plutonium Scrap, Classification of (1972)
Unirradiated Reactor Fuel and Associated Radioactive Ma
Unirradiated Uranium Scrap, Classification of (1970) $3
Unit Nuclear Power Plants (Revision 1, 1/75)

Unit Weight, Yield, and Air Content (Gravimetric) of Co
United States from Weapons Test. Conducted Through 1962
United States (1975) $5.00

Units Applied as Standby Power Supplies for Nuclear Pow
Units for Nuclear Materials Control (1971) $3.25
Units of Light-Water Cooled Nuclear Power Plants (Rev
UNR Thread Form) (1974) $15.00
(UNS N04400) Plate, Sheet and Strip, Specification for (
(UNS N04400) Seamless Pipe and Tube (1971) $1.75
(UNS N08800) Rod and Bar, (1974) $1.75
(UNS N08800) Seamless Pipe and Tube (1974) $1.75
Unusual Occurrence Reports (2-74) Amendment 1 (1-75),
Uptake Measurements Using a Neck Phantom (1973) $3.00
Uranium and Plutonium Concentrations and Isotopic Abund
Uranium and Plutonium Concentrations and Isotopic Abund
Uranium and Plutonium Fuel Manufacturing Plants (6/74)
Uranium and Plutonium Fuel (Mass Spectrometric Method)
Uranium and Plutonium Fuel (Mass Spectrometric Method),
Uranium and Plutonium Fuel (Neodymium 148 Method), Stan
Uranium and Plutonium Fuel (Neodymium-148 Method) (197
Uranium by Controlled Potential Coulometry, Method of T
Uranium by Controlled-Potential Coulometry, Method of
Uranium Castings (1975) $3.00

Uranium Dioxide Powder (1973) $1.75

Uranium Dioxide Powder (1974) ASTM C753-1973 $1.75
Uranium Dioxide Powder (1975) ASTM C757-1974a $1.75
Uranium Dioxide Powders and Pellets (2/9/73)
Uranium Dioxide Powders and Pellets, Chemical, Mass Spe
Uranium Dioxide Powders and Pellets, Methods for Chemic
Uranium Dioxide (6-71) Amendment 1 (12-74)
Uranium Enrichment Facilities (Revision 1, 10/75)
Uranium Enrichment Facilities (12/74)
Uranium Enrichment Facility) (12/74)
Uranium Fuel Plates by Gamma-Ray Spectrometry (9/74)
Uranium Fuel (Radiochemical Method), Method of Test for
Uranium Fuel (Radiochemical Method), Standard Method of
Uranium Hexafluoride for Transport, Packaging of (1971)
Uranium Hexafluoride (UF) 2/2/73)

/Rd Analytical Meth
Uranium Hexafluoride, Analytical Procedures for (1972)
Uranium Hexafluoride, Chemical, Mass Spectrometric, Spe
Uranium Hexafluoride, Methods for (1974) ASTM C761-197
Uranium in Aqueous Solutions Standard Method for (1975)
Uranium in Aqueous Solutions (1973) ASTM E318-1969 $1.
Uranium in Water by Fluorometry, Test for (1975) $1.75
Uranium Milling Licenses (2/73)

/ Mass Sp NRC

RG 5.5

Jon of a Special

Uranium Mills (4/73)
Uranium Mills (6/73)

Uranium-Aluminum Fuel Elements for Use in Research Rea
Uranium-Aluminum Fuel Elements (1974) ANS 15.2 $8.50
Uranium-Thorium Milling Waste Retention Systems (11/74
Uranium-Thorium Milling Waste Retention Systems, Stabl
Uranium-235 Enrichment Assay by Gamma-Ray Spectrometr
Uranium-238 Fission (1974) ASTM E343-1972 $1.75
Uranium-238 Fission, Test for (1972) $1.75
Uranium-288 Fission (1974) ASTM E393-1973 $1.75
Uranyl Nitrate Solution (6-71)

Uranyl Nitrate Solutions for Assay, Isotopic Distributi
Uranyl Nitrate Solutions, Nuclear and Radiochemical Ana
Vacuum Induction Melted Solution Heat Treated (1975) $3
Vacuum Induction Melted 1750 F (954.4 C) Solution Heat
Vacuum Induction Melted 1750 F (954.4 C) Solution Heat
Vacuum Induction Melted 1750F (954.4C) Alloy Tubing, Se
Vacuum Induction Melted 1950 F (1065.6 C) Solution Trea
Vacuum Induction Melted 1950 F (1065.6C) Solution Treat
Vacuum Treated Carbon and Alloy Steel Forgings for Pres
Vacuum Treated (ASME SA-508 with Additional Requiremen
Validation of Calculational Methods for Nuclear Critica
Validation of Calculational Methods for Nuclear Critica

/Od ANSI

ERDA
NRC
ASTM

SAE

RG 5.39

C799
AMS5662D